JMX

Camel has optional support for JMX management, which is part of the camel-management and camel-management-api JARs.

Using JMX to manage Apache Camel

The JMX instrumentation agent is enabled in Camel when the camel-management JAR is included in the classpath. Once enabled, the Camel runtime creates and registers MBean management objects with a MBeanServer instance in the VM. This allows Camel users to instantly obtain insights into how Camel routes perform down to the individual processor level.

The high level supported types of management objects are:

Most of these management objects also expose lifecycle operations in addition to performance counter-attributes.

Disabling or enabling Camel JMX

JMX is only enabled in Camel when the camel-management JAR is included on the classpath. To quickly enable or disable JMX, simply add or remove this JAR from the classpath.

It is also possible to enable or disable JMX via configuration as documented below.

You can disable the JMX instrumentation agent by setting the Java VM system property as follows:

-Dorg.apache.camel.jmx.disabled=true

The property value is treated as boolean.

Alternatively, add a jmxAgent element inside the camelContext element in Spring XML configuration:

<camelContext id="camel" xmlns="http://camel.apache.org/schema/spring">
  <jmxAgent id="agent" disabled="true"/>
    ...
</camelContext>

In Java, you can disable JMX directly on the CamelContext as follows:

CamelContext camel = new DefaultCamelContext();
camel.disableJMX();

Camel JMX configuration options

Camel JMX can be configured with the following options.

Option JVM System Property Default Value Description

id

required The JMX agent name

usePlatformMBeanServer

org.apache.camel.jmx.usePlatformMBeanServer

true

Whether to use the MBeanServer from JVM.

mbeanServerDefaultDomain

org.apache.camel.jmx.mbeanServerDefaultDomain

org.apache.camel

The default JMX domain of the MBeanServer

mbeanObjectDomainName

org.apache.camel.jmx.mbeanObjectDomainName

org.apache.camel

The JMX domain that all object names will use

mbeansLevel

Default

Configure the level for which MBeans are registered. See section Registering MBeans for specific resources only for more details.

onlyRegisterProcessorWithCustomId

org.apache.camel.jmx.onlyRegisterProcessorWithCustomId

false

If this option is enabled, then only processors with a custom id set will be registered. This allows you to filer out unwanted processors in the JMX console.

statisticsLevel

Default

Configure the level for whether performance statistics is enabled for the MBean. See section Configuring level of granularity for performance statistics for more details.

includeHostName

org.apache.camel.jmx.includeHostName

false

Whether to include the hostname in the MBean naming.

useHostIPAddress

org.apache.camel.jmx.useHostIPAddress

false

Whether to use hostname or IP Address in the service url when creating the remote connector. By default, the hostname will be used.

loadStatisticsEnabled

org.apache.camel.jmx.loadStatisticsEnabled

false

Whether load statistics is enabled (gather load statistics using a background thread per CamelContext).

endpointRuntimeStatisticsEnabled

org.apache.camel.jmx.endpointRuntimeStatisticsEnabled

true

Whether endpoint runtime statistics is enabled (gather runtime usage of each incoming and outgoing endpoint).

mask

org.apache.camel.jmx.mask

true

A flag that indicates whether to remove detected sensitive information (such as passwords) from MBean names and attributes.

updateRouteEnabled

org.apache.camel.jmx.updateRouteEnabled

false

Whether to allow updating routes at runtime via JMX using the ManagedRouteMBean. This is disabled by default, but can be enabled for development and troubleshooting purposes, such as updating routes in an existing running Camel via JMX and other tools.

Registering MBeans for specific resources only

Camel automatically registers MBeans for the context, routes, and processors when it starts up. However, you can specify a level to control whether MBeans are registered at startup. The levels are:

  • Default - Camel will register MBeans for the context, all the routes and the processors.

  • RoutesOnly - Camel will register MBeans for the context and for all the routes (not for any processor).

  • ContextOnly - Camel will register MBeans for the context (neither for any route nor for any processor).

Registering new MBeans for new routes, created by route templates, Kamelets

Camel provides the following settings to control when to register mbeans.

Option Default Description

registerAlways

false

If enabled then MBeans are always registered.

registerNewRoutes

true

If enabled then adding new routes after CamelContext has been started will also register MBeans from that given route.

registerRoutesCreateByKamelet

false

If enabled then adding routes created by Kamelet will also register MBeans from that given route.

registerRoutesCreateByTemplate

true

If enabled then adding routes created by route template (not Kamelet, see option above) will also register MBeans from that given route.

By default, Camel automatically registers MBeans for all routes configured at startup. The registerNewRoutes option controls whether MBeans should also be registered for new routes added later on. This feature can be disabled, for example, if you are adding and removing temporary routes that do not require management.

In Camel 4.5 onwards, there are additional options to configure whether routes created from route templates or Kamelets should be registered as MBeans or not. By default, Kamelets are now disabled with the intention to regard a Kamelet as a component, instead of a set of additional routes and processors MBeans that is essentially unnecessary for management and monitoring. The option registerRoutesCreateByKamelet can be set to true to enable MBeans, which is how Camel 4.4 or older behaves. On the other hand, routes created from route templates (not Kamelets) are default enabled.

However, be cautious when using the registerAlways option in conjunction with dynamic EIP patterns, such as the Recipient List, which have unique endpoints. This can potentially lead to system degradation due to the increasing number of MBeans in the registry from its associated services/producers. Keep in mind that an MBean is not a lightweight object and consumes memory.

Management naming pattern

You can configure a naming pattern for the MBeans names that Camel creates. The pattern is used as part of the ObjectName as the key after the domain name.

By default, Camel will use MBean names for the ManagedCamelContextMBean as follows:

org.apache.camel:context=camel-1,type=context,name=camel-1

If you configure a name on the CamelContext then that name is part of the ObjectName as well. For example, if we have:

<camelContext id="myCamel" ...>

Then the MBean names will be as follows:

org.apache.camel:context=myCamel,type=context,name=myCamel

In the event of a naming clash within the JVM, such as when there is already an MBean with the same name, Camel will automatically try to resolve the issue by finding a new, available name in the JMXMBeanServer using a counter. For example, the counter will be appended to the name, resulting in an ObjectName such as myCamel-1:

org.apache.camel:context=myCamel-1,type=context,name=myCamel

Naming Patterns

This is possible because Camel uses a naming pattern by default that supports the following tokens:

  • #camelId# = the CamelContext id (eg the name)

  • #name# - same as #camelId#

  • #counter# - an incrementing counter

If there is a naming clash in the JMXMBeanServer then Camel will automatically fall back and use the #counter# in the pattern to remedy this. Thus, the following patterns will then be used: #name#-#counter#

If you set an explicit naming pattern, then that pattern is always used, and the default patterns above are not used.

This allows us to have full control, very easily, of the naming for both the CamelContext id in the Registry and the JMX MBeans in the JMXMBeanRegistry.

So if we want to explicitly name both the CamelContext and to use fixed MBean names that do not change (i.e., without counters), then we can use the managementNamePattern attribute:

<camelContext id="myCamel" managementNamePattern="#name#">

Then the MBean names will always be as follows:

org.apache.camel:context=myCamel,type=context,name=myCamel

In Java, you can configure the managementNamePattern as follows:

context.getManagementNameStrategy().setNamePattern("#name#");

Configuring performance statistics

You can set a level for whether performance statistics are enabled or not when Camel starts up. The levels are:

  • Default - Camel will enable statistics for both routes and processors (fine-grained).

  • Extended - As default but with additional statistics gathered during runtime such as fine-grained level of usage of endpoints and more.

  • RoutesOnly - Camel will only enable statistics for routes (coarse grained)

  • Off - Camel will not use any statistics.

What does statistics enabled mean?

Statistics enabled means that Camel will do fine-grained performance statistics for that particular MBean. There are statistics you can see, such as number of exchanges completed/failed, last/total/min/max/mean processing time, first/last failed time, etc.

Using Java DSL, you set the statistics level by:

// only enable routes when Camel starts
context.getManagementStrategy().setStatisticsLevel(ManagementStatisticsLevel.RoutesOnly);

And from XML DSL you can do:

<camelContext id="camel" xmlns="http://camel.apache.org/schema/spring">
    <jmxAgent id="agent" statisticsLevel="RoutesOnly"/>
 ...
</camelContext>

Performance load statistics

It is possible to include load statistics for CamelContext and Route MBeans. These statistics are for average load based on the number of in-flight exchanges, measured over periods of 1, 5, and 15 minutes. This is similar to load statistics on Unix systems.

You can enable this by setting loadStatisticsEnabled=true.

Hiding sensitive information

By default, Camel enlists MBeans in JMX such as endpoints configured using URIs. In this configuration, there may be sensitive information such as passwords.

This will mask URIs having options such as password and passphrase, and use xxxxxx as the replacement value.

Masking JMX attributes in custom components

When implementing custom Camel components, you can mark which JMX attributes to mask with the @ManagedAttribute and @ManagedOperation annotations.

The mask attribute can be set to true to indicate that the result of this JMX attribute/operation should be masked (if enabled on JMX agent, see above).

For example, on the default managed endpoints from camel-core org.apache.camel.api.management.mbean.ManagedEndpointMBean, we have declared that the EndpointUri JMX attribute is masked:

@ManagedAttribute(description = "Endpoint URI", mask = true)
String getEndpointUri();
Back to top