AWS DynamoDB Streams

Since Camel 3.1

Only consumer is supported

The AWS2 DynamoDB Stream component supports receiving messages from Amazon DynamoDB Stream service.

Prerequisites

You must have a valid Amazon Web Services developer account, and be signed up to use Amazon DynamoDB Streams. More information are available at AWS DynamoDB

URI Format

aws2-ddbstream://table-name[?options]

The stream needs to be created prior to it being used.
You can append query options to the URI in the following format, ?options=value&option2=value&…​

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

  • the Component DSL.

  • in a configuration file (application.properties, *.yaml files, etc).

  • directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

  • They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.

  • They allow externalizing the configuration from the code.

  • They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The AWS DynamoDB Streams component supports 22 options, which are listed below.

Name Description Default Type

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

configuration (consumer)

The component configuration.

Ddb2StreamConfiguration

maxResultsPerRequest (consumer)

Maximum number of records that will be fetched in each poll.

int

overrideEndpoint (consumer)

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

false

boolean

region (consumer)

The region in which DDBStreams client needs to work.

Enum values:

  • ap-south-2

  • ap-south-1

  • eu-south-1

  • eu-south-2

  • us-gov-east-1

  • me-central-1

  • il-central-1

  • ca-central-1

  • eu-central-1

  • us-iso-west-1

  • eu-central-2

  • us-west-1

  • us-west-2

  • af-south-1

  • eu-north-1

  • eu-west-3

  • eu-west-2

  • eu-west-1

  • ap-northeast-3

  • ap-northeast-2

  • ap-northeast-1

  • me-south-1

  • sa-east-1

  • ap-east-1

  • cn-north-1

  • us-gov-west-1

  • ap-southeast-1

  • ap-southeast-2

  • us-iso-east-1

  • ap-southeast-3

  • ap-southeast-4

  • us-east-1

  • us-east-2

  • cn-northwest-1

  • us-isob-east-1

  • aws-global

  • aws-cn-global

  • aws-us-gov-global

  • aws-iso-global

  • aws-iso-b-global

String

streamIteratorType (consumer)

Defines where in the DynamoDB stream to start getting records. Note that using FROM_START can cause a significant delay before the stream has caught up to real-time.

Enum values:

  • FROM_LATEST

  • FROM_START

FROM_LATEST

StreamIteratorType

uriEndpointOverride (consumer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

amazonDynamoDbStreamsClient (consumer (advanced))

Autowired Amazon DynamoDB client to use for all requests for this endpoint.

DynamoDbStreamsClient

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

healthCheckConsumerEnabled (health)

Used for enabling or disabling all consumer based health checks from this component.

true

boolean

healthCheckProducerEnabled (health)

Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.

true

boolean

proxyHost (proxy)

To define a proxy host when instantiating the DDBStreams client.

String

proxyPort (proxy)

To define a proxy port when instantiating the DDBStreams client.

Integer

proxyProtocol (proxy)

To define a proxy protocol when instantiating the DDBStreams client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

accessKey (security)

Amazon AWS Access Key.

String

profileCredentialsName (security)

If using a profile credentials provider this parameter will set the profile name.

String

secretKey (security)

Amazon AWS Secret Key.

String

sessionToken (security)

Amazon AWS Session Token used when the user needs to assume a IAM role.

String

trustAllCertificates (security)

If we want to trust all certificates in case of overriding the endpoint.

false

boolean

useDefaultCredentialsProvider (security)

Set whether the DynamoDB Streams client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

boolean

useProfileCredentialsProvider (security)

Set whether the Cloudtrail client should expect to load credentials through a profile credentials provider.

false

boolean

useSessionCredentials (security)

Set whether the DDB Streams client should expect to use Session Credentials. This is useful in situation in which the user needs to assume a IAM role for doing operations in DDB.

false

boolean

Endpoint Options

The AWS DynamoDB Streams endpoint is configured using URI syntax:

aws2-ddbstream:tableName

With the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

tableName (consumer)

Required Name of the dynamodb table.

String

Query Parameters (36 parameters)

Name Description Default Type

maxResultsPerRequest (consumer)

Maximum number of records that will be fetched in each poll.

int

overrideEndpoint (consumer)

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

false

boolean

region (consumer)

The region in which DDBStreams client needs to work.

Enum values:

  • ap-south-2

  • ap-south-1

  • eu-south-1

  • eu-south-2

  • us-gov-east-1

  • me-central-1

  • il-central-1

  • ca-central-1

  • eu-central-1

  • us-iso-west-1

  • eu-central-2

  • us-west-1

  • us-west-2

  • af-south-1

  • eu-north-1

  • eu-west-3

  • eu-west-2

  • eu-west-1

  • ap-northeast-3

  • ap-northeast-2

  • ap-northeast-1

  • me-south-1

  • sa-east-1

  • ap-east-1

  • cn-north-1

  • us-gov-west-1

  • ap-southeast-1

  • ap-southeast-2

  • us-iso-east-1

  • ap-southeast-3

  • ap-southeast-4

  • us-east-1

  • us-east-2

  • cn-northwest-1

  • us-isob-east-1

  • aws-global

  • aws-cn-global

  • aws-us-gov-global

  • aws-iso-global

  • aws-iso-b-global

String

sendEmptyMessageWhenIdle (consumer)

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

boolean

streamIteratorType (consumer)

Defines where in the DynamoDB stream to start getting records. Note that using FROM_START can cause a significant delay before the stream has caught up to real-time.

Enum values:

  • FROM_LATEST

  • FROM_START

FROM_LATEST

StreamIteratorType

uriEndpointOverride (consumer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

amazonDynamoDbStreamsClient (consumer (advanced))

Autowired Amazon DynamoDB client to use for all requests for this endpoint.

DynamoDbStreamsClient

bridgeErrorHandler (consumer (advanced))

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

  • InOnly

  • InOut

ExchangePattern

pollStrategy (consumer (advanced))

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

PollingConsumerPollStrategy

proxyHost (proxy)

To define a proxy host when instantiating the DDBStreams client.

String

proxyPort (proxy)

To define a proxy port when instantiating the DDBStreams client.

Integer

proxyProtocol (proxy)

To define a proxy protocol when instantiating the DDBStreams client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

backoffErrorThreshold (scheduler)

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

int

backoffIdleThreshold (scheduler)

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

int

backoffMultiplier (scheduler)

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

int

delay (scheduler)

Milliseconds before the next poll.

500

long

greedy (scheduler)

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

boolean

initialDelay (scheduler)

Milliseconds before the first poll starts.

1000

long

repeatCount (scheduler)

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

0

long

runLoggingLevel (scheduler)

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that.

Enum values:

  • TRACE

  • DEBUG

  • INFO

  • WARN

  • ERROR

  • OFF

TRACE

LoggingLevel

scheduledExecutorService (scheduler)

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

ScheduledExecutorService

scheduler (scheduler)

To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler.

none

Object

schedulerProperties (scheduler)

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

Map

startScheduler (scheduler)

Whether the scheduler should be auto started.

true

boolean

timeUnit (scheduler)

Time unit for initialDelay and delay options.

Enum values:

  • NANOSECONDS

  • MICROSECONDS

  • MILLISECONDS

  • SECONDS

  • MINUTES

  • HOURS

  • DAYS

MILLISECONDS

TimeUnit

useFixedDelay (scheduler)

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

boolean

accessKey (security)

Amazon AWS Access Key.

String

profileCredentialsName (security)

If using a profile credentials provider this parameter will set the profile name.

String

secretKey (security)

Amazon AWS Secret Key.

String

sessionToken (security)

Amazon AWS Session Token used when the user needs to assume a IAM role.

String

trustAllCertificates (security)

If we want to trust all certificates in case of overriding the endpoint.

false

boolean

useDefaultCredentialsProvider (security)

Set whether the DynamoDB Streams client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

boolean

useProfileCredentialsProvider (security)

Set whether the Cloudtrail client should expect to load credentials through a profile credentials provider.

false

boolean

useSessionCredentials (security)

Set whether the DDB Streams client should expect to use Session Credentials. This is useful in situation in which the user needs to assume a IAM role for doing operations in DDB.

false

boolean

Required DynamoDBStream component options

You have to provide the DynamoDbStreamsClient in the Registry with proxies and relevant credentials configured.

Sequence Numbers

You can provide a literal string as the sequence number or provide a bean in the registry. An example of using the bean would be to save your current position in the change feed and restore it on Camel startup.

It is an error to provide a sequence number that is greater than the largest sequence number in the describe-streams result, as this will lead to the AWS call returning an HTTP 400.

Usage

Static credentials, Default Credential Provider and Profile Credentials Provider

You have the possibility of avoiding the usage of explicit static credentials, by specifying the useDefaultCredentialsProvider option and set it to true.

The order of evaluation for Default Credentials Provider is the following:

  • Java system properties - aws.accessKeyId and aws.secretKey

  • Environment variables - AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY.

  • Web Identity Token from AWS STS.

  • The shared credentials and config files.

  • Amazon ECS container credentials - loaded from the Amazon ECS if the environment variable AWS_CONTAINER_CREDENTIALS_RELATIVE_URI is set.

  • Amazon EC2 Instance profile credentials.

You have also the possibility of using Profile Credentials Provider, by specifying the useProfileCredentialsProvider option to true and profileCredentialsName to the profile name.

Only one of static, default and profile credentials could be used at the same time.

For more information about this you can look at AWS credentials documentation

Coping with Downtime

AWS DynamoDB Streams outage of less than 24 hours

The consumer will resume from the last seen sequence number (as implemented for CAMEL-9515), so you should receive a flood of events in quick succession, as long as the outage did not also include DynamoDB itself.

AWS DynamoDB Streams outage of more than 24 hours

Given that AWS only retain 24 hours worth of changes, you will have missed change events no matter what mitigations are in place.

Message Body

The Message body is instance of "software.amazon.awssdk.services.dynamodb.model.Record", for more information about it, have a look at the related javadoc

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws2-ddb</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

Spring Boot Auto-Configuration

When using aws2-ddbstream with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-aws2-ddb-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 52 options, which are listed below.

Name Description Default Type

camel.component.aws2-ddb.access-key

Amazon AWS Access Key.

String

camel.component.aws2-ddb.amazon-d-d-b-client

To use the AmazonDynamoDB as the client. The option is a software.amazon.awssdk.services.dynamodb.DynamoDbClient type.

DynamoDbClient

camel.component.aws2-ddb.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws2-ddb.configuration

The component configuration. The option is a org.apache.camel.component.aws2.ddb.Ddb2Configuration type.

Ddb2Configuration

camel.component.aws2-ddb.consistent-read

Determines whether strong consistency should be enforced when data is read.

false

Boolean

camel.component.aws2-ddb.enabled

Whether to enable auto configuration of the aws2-ddb component. This is enabled by default.

Boolean

camel.component.aws2-ddb.enabled-initial-describe-table

Set whether the initial Describe table operation in the DDB Endpoint must be done, or not.

true

Boolean

camel.component.aws2-ddb.health-check-consumer-enabled

Used for enabling or disabling all consumer based health checks from this component.

true

Boolean

camel.component.aws2-ddb.health-check-producer-enabled

Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.

true

Boolean

camel.component.aws2-ddb.key-attribute-name

Attribute name when creating table.

String

camel.component.aws2-ddb.key-attribute-type

Attribute type when creating table.

String

camel.component.aws2-ddb.key-scalar-type

The key scalar type, it can be S (String), N (Number) and B (Bytes).

String

camel.component.aws2-ddb.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws2-ddb.operation

What operation to perform.

Ddb2Operations

camel.component.aws2-ddb.override-endpoint

Set the need for overriding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

false

Boolean

camel.component.aws2-ddb.profile-credentials-name

If using a profile credentials provider this parameter will set the profile name.

String

camel.component.aws2-ddb.proxy-host

To define a proxy host when instantiating the DDB client.

String

camel.component.aws2-ddb.proxy-port

The region in which DynamoDB client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

Integer

camel.component.aws2-ddb.proxy-protocol

To define a proxy protocol when instantiating the DDB client.

Protocol

camel.component.aws2-ddb.read-capacity

The provisioned throughput to reserve for reading resources from your table.

Long

camel.component.aws2-ddb.region

The region in which DDB client needs to work.

String

camel.component.aws2-ddb.secret-key

Amazon AWS Secret Key.

String

camel.component.aws2-ddb.session-token

Amazon AWS Session Token used when the user needs to assume a IAM role.

String

camel.component.aws2-ddb.trust-all-certificates

If we want to trust all certificates in case of overriding the endpoint.

false

Boolean

camel.component.aws2-ddb.uri-endpoint-override

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

camel.component.aws2-ddb.use-default-credentials-provider

Set whether the S3 client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

Boolean

camel.component.aws2-ddb.use-profile-credentials-provider

Set whether the DDB client should expect to load credentials through a profile credentials provider.

false

Boolean

camel.component.aws2-ddb.use-session-credentials

Set whether the DDB client should expect to use Session Credentials. This is useful in situation in which the user needs to assume a IAM role for doing operations in DDB.

false

Boolean

camel.component.aws2-ddb.write-capacity

The provisioned throughput to reserved for writing resources to your table.

Long

camel.component.aws2-ddbstream.access-key

Amazon AWS Access Key.

String

camel.component.aws2-ddbstream.amazon-dynamo-db-streams-client

Amazon DynamoDB client to use for all requests for this endpoint. The option is a software.amazon.awssdk.services.dynamodb.streams.DynamoDbStreamsClient type.

DynamoDbStreamsClient

camel.component.aws2-ddbstream.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws2-ddbstream.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.aws2-ddbstream.configuration

The component configuration. The option is a org.apache.camel.component.aws2.ddbstream.Ddb2StreamConfiguration type.

Ddb2StreamConfiguration

camel.component.aws2-ddbstream.enabled

Whether to enable auto configuration of the aws2-ddbstream component. This is enabled by default.

Boolean

camel.component.aws2-ddbstream.health-check-consumer-enabled

Used for enabling or disabling all consumer based health checks from this component.

true

Boolean

camel.component.aws2-ddbstream.health-check-producer-enabled

Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.

true

Boolean

camel.component.aws2-ddbstream.max-results-per-request

Maximum number of records that will be fetched in each poll.

Integer

camel.component.aws2-ddbstream.override-endpoint

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

false

Boolean

camel.component.aws2-ddbstream.profile-credentials-name

If using a profile credentials provider this parameter will set the profile name.

String

camel.component.aws2-ddbstream.proxy-host

To define a proxy host when instantiating the DDBStreams client.

String

camel.component.aws2-ddbstream.proxy-port

To define a proxy port when instantiating the DDBStreams client.

Integer

camel.component.aws2-ddbstream.proxy-protocol

To define a proxy protocol when instantiating the DDBStreams client.

Protocol

camel.component.aws2-ddbstream.region

The region in which DDBStreams client needs to work.

String

camel.component.aws2-ddbstream.secret-key

Amazon AWS Secret Key.

String

camel.component.aws2-ddbstream.session-token

Amazon AWS Session Token used when the user needs to assume a IAM role.

String

camel.component.aws2-ddbstream.stream-iterator-type

Defines where in the DynamoDB stream to start getting records. Note that using FROM_START can cause a significant delay before the stream has caught up to real-time.

Ddb2StreamConfiguration$StreamIteratorType

camel.component.aws2-ddbstream.trust-all-certificates

If we want to trust all certificates in case of overriding the endpoint.

false

Boolean

camel.component.aws2-ddbstream.uri-endpoint-override

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

camel.component.aws2-ddbstream.use-default-credentials-provider

Set whether the DynamoDB Streams client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

Boolean

camel.component.aws2-ddbstream.use-profile-credentials-provider

Set whether the Cloudtrail client should expect to load credentials through a profile credentials provider.

false

Boolean

camel.component.aws2-ddbstream.use-session-credentials

Set whether the DDB Streams client should expect to use Session Credentials. This is useful in situation in which the user needs to assume a IAM role for doing operations in DDB.

false

Boolean
Back to top