AWS Bedrock Agent Runtime

Since Camel 4.5

Only producer is supported

The AWS2 Bedrock component supports invoking a supported LLM model from AWS Bedrock service.

Prerequisites

You must have a valid Amazon Web Services developer account, and be signed up to use Amazon Bedrock. More information is available at Amazon Bedrock.

URI Format

aws-bedrock-agent-runtime://label[?options]

You can append query options to the URI in the following format:

?options=value&option2=value&…​

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

  • the Component DSL.

  • in a configuration file (application.properties, *.yaml files, etc).

  • directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

  • They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.

  • They allow externalizing the configuration from the code.

  • They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The AWS Bedrock Agent Runtime component supports 24 options, which are listed below.

Name Description Default Type

configuration (producer)

Component configuration.

BedrockAgentRuntimeConfiguration

knowledgeBaseId (producer)

Required Define the Knowledge Base Id we are going to use.

String

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

modelId (producer)

Required Define the model Id we are going to use.

Enum values:

  • anthropic.claude-instant-v1

  • anthropic.claude-v2

  • anthropic.claude-v2:1

String

operation (producer)

Required The operation to perform.

Enum values:

  • retrieveAndGenerate

BedrockAgentRuntimeOperations

overrideEndpoint (producer)

Set the need for overriding the endpoint. This option needs to be used in combination with the uriEndpointOverride option.

false

boolean

pojoRequest (producer)

If we want to use a POJO request as body or not.

false

boolean

profileCredentialsName (producer)

If using a profile credentials provider, this parameter will set the profile name.

false

String

region (producer)

The region in which Bedrock Agent Runtime client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example, ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

Enum values:

  • us-east-1

  • us-west-1

  • ap-southeast-1

  • ap-northeast-1

  • eu-central-1

String

uriEndpointOverride (producer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

useDefaultCredentialsProvider (producer)

Set whether the Bedrock Agent Runtime client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

boolean

useProfileCredentialsProvider (producer)

Set whether the Bedrock Agent Runtime client should expect to load credentials through a profile credentials provider.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

bedrockAgentRuntimeClient (advanced)

Autowired To use an existing configured AWS Bedrock Agent Runtime client.

BedrockAgentRuntimeClient

healthCheckConsumerEnabled (health)

Used for enabling or disabling all consumer based health checks from this component.

true

boolean

healthCheckProducerEnabled (health)

Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.

true

boolean

proxyHost (proxy)

To define a proxy host when instantiating the Bedrock Agent Runtime client.

String

proxyPort (proxy)

To define a proxy port when instantiating the Bedrock Agent Runtime client.

Integer

proxyProtocol (proxy)

To define a proxy protocol when instantiating the Bedrock Agent Runtime client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

accessKey (security)

Amazon AWS Access Key.

String

secretKey (security)

Amazon AWS Secret Key.

String

sessionToken (security)

Amazon AWS Session Token used when the user needs to assume an IAM role.

String

trustAllCertificates (security)

If we want to trust all certificates in case of overriding the endpoint.

false

boolean

useSessionCredentials (security)

Set whether the Bedrock Agent Runtime client should expect to use Session Credentials. This is useful in a situation in which the user needs to assume an IAM role for doing operations in Bedrock.

false

boolean

Endpoint Options

The AWS Bedrock Agent Runtime endpoint is configured using URI syntax:

aws-bedrock-agent-runtime:label

With the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

label (producer)

Required Logical name.

String

Query Parameters (20 parameters)

Name Description Default Type

knowledgeBaseId (producer)

Required Define the Knowledge Base Id we are going to use.

String

modelId (producer)

Required Define the model Id we are going to use.

Enum values:

  • anthropic.claude-instant-v1

  • anthropic.claude-v2

  • anthropic.claude-v2:1

String

operation (producer)

Required The operation to perform.

Enum values:

  • retrieveAndGenerate

BedrockAgentRuntimeOperations

overrideEndpoint (producer)

Set the need for overriding the endpoint. This option needs to be used in combination with the uriEndpointOverride option.

false

boolean

pojoRequest (producer)

If we want to use a POJO request as body or not.

false

boolean

profileCredentialsName (producer)

If using a profile credentials provider, this parameter will set the profile name.

false

String

region (producer)

The region in which Bedrock Agent Runtime client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example, ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

Enum values:

  • us-east-1

  • us-west-1

  • ap-southeast-1

  • ap-northeast-1

  • eu-central-1

String

uriEndpointOverride (producer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

useDefaultCredentialsProvider (producer)

Set whether the Bedrock Agent Runtime client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

boolean

useProfileCredentialsProvider (producer)

Set whether the Bedrock Agent Runtime client should expect to load credentials through a profile credentials provider.

false

boolean

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

bedrockAgentRuntimeClient (advanced)

Autowired To use an existing configured AWS Bedrock Agent Runtime client.

BedrockAgentRuntimeClient

proxyHost (proxy)

To define a proxy host when instantiating the Bedrock Agent Runtime client.

String

proxyPort (proxy)

To define a proxy port when instantiating the Bedrock Agent Runtime client.

Integer

proxyProtocol (proxy)

To define a proxy protocol when instantiating the Bedrock Agent Runtime client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

accessKey (security)

Amazon AWS Access Key.

String

secretKey (security)

Amazon AWS Secret Key.

String

sessionToken (security)

Amazon AWS Session Token used when the user needs to assume an IAM role.

String

trustAllCertificates (security)

If we want to trust all certificates in case of overriding the endpoint.

false

boolean

useSessionCredentials (security)

Set whether the Bedrock Agent Runtime client should expect to use Session Credentials. This is useful in a situation in which the user needs to assume an IAM role for doing operations in Bedrock.

false

boolean

Required Bedrock component options

You have to provide the bedrockRuntimeClient in the Registry or your accessKey and secretKey to access the Amazon Bedrock service.

Usage

Static credentials, Default Credential Provider and Profile Credentials Provider

You have the possibility of avoiding the usage of explicit static credentials by specifying the useDefaultCredentialsProvider option and set it to true.

The order of evaluation for Default Credentials Provider is the following:

  • Java system properties - aws.accessKeyId and aws.secretKey.

  • Environment variables - AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY.

  • Web Identity Token from AWS STS.

  • The shared credentials and config files.

  • Amazon ECS container credentials - loaded from the Amazon ECS if the environment variable AWS_CONTAINER_CREDENTIALS_RELATIVE_URI is set.

  • Amazon EC2 Instance profile credentials.

You have also the possibility of using Profile Credentials Provider, by specifying the useProfileCredentialsProvider option to true and profileCredentialsName to the profile name.

Only one of static, default and profile credentials could be used at the same time.

For more information about this you can look at AWS credentials documentation

Message Headers

The AWS Bedrock Agent Runtime component supports 3 message header(s), which is/are listed below:

Name Description Default Type

CamelAwsBedrockAgentRuntimeOperation (producer)

Constant: OPERATION

The operation we want to perform.

String

CamelAwsBedrockAgentRuntimeCitations (producer)

Constant: CITATIONS

When retrieving and generating a response, this header will contain the citations.

String

CamelAwsBedrockAgentRuntimeSessionId (producer)

Constant: SESSION_ID

When retrieving and generating a response, this header will contain he unique identifier of the session. Reuse the same value to continue the same session with the knowledge base.

String

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws-bedrock</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

Spring Boot Auto-Configuration

When using aws-bedrock-agent-runtime with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-aws-bedrock-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 77 options, which are listed below.

Name Description Default Type

camel.component.aws-bedrock-agent-runtime.access-key

Amazon AWS Access Key.

String

camel.component.aws-bedrock-agent-runtime.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws-bedrock-agent-runtime.bedrock-agent-runtime-client

To use an existing configured AWS Bedrock Agent Runtime client. The option is a software.amazon.awssdk.services.bedrockagentruntime.BedrockAgentRuntimeClient type.

BedrockAgentRuntimeClient

camel.component.aws-bedrock-agent-runtime.configuration

Component configuration. The option is a org.apache.camel.component.aws2.bedrock.agentruntime.BedrockAgentRuntimeConfiguration type.

BedrockAgentRuntimeConfiguration

camel.component.aws-bedrock-agent-runtime.enabled

Whether to enable auto configuration of the aws-bedrock-agent-runtime component. This is enabled by default.

Boolean

camel.component.aws-bedrock-agent-runtime.health-check-consumer-enabled

Used for enabling or disabling all consumer based health checks from this component.

true

Boolean

camel.component.aws-bedrock-agent-runtime.health-check-producer-enabled

Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.

true

Boolean

camel.component.aws-bedrock-agent-runtime.knowledge-base-id

Define the Knowledge Base Id we are going to use.

String

camel.component.aws-bedrock-agent-runtime.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws-bedrock-agent-runtime.model-id

Define the model Id we are going to use.

String

camel.component.aws-bedrock-agent-runtime.operation

The operation to perform.

BedrockAgentRuntimeOperations

camel.component.aws-bedrock-agent-runtime.override-endpoint

Set the need for overriding the endpoint. This option needs to be used in combination with the uriEndpointOverride option.

false

Boolean

camel.component.aws-bedrock-agent-runtime.pojo-request

If we want to use a POJO request as body or not.

false

Boolean

camel.component.aws-bedrock-agent-runtime.profile-credentials-name

If using a profile credentials provider, this parameter will set the profile name.

false

String

camel.component.aws-bedrock-agent-runtime.proxy-host

To define a proxy host when instantiating the Bedrock Agent Runtime client.

String

camel.component.aws-bedrock-agent-runtime.proxy-port

To define a proxy port when instantiating the Bedrock Agent Runtime client.

Integer

camel.component.aws-bedrock-agent-runtime.proxy-protocol

To define a proxy protocol when instantiating the Bedrock Agent Runtime client.

Protocol

camel.component.aws-bedrock-agent-runtime.region

The region in which Bedrock Agent Runtime client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example, ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

camel.component.aws-bedrock-agent-runtime.secret-key

Amazon AWS Secret Key.

String

camel.component.aws-bedrock-agent-runtime.session-token

Amazon AWS Session Token used when the user needs to assume an IAM role.

String

camel.component.aws-bedrock-agent-runtime.trust-all-certificates

If we want to trust all certificates in case of overriding the endpoint.

false

Boolean

camel.component.aws-bedrock-agent-runtime.uri-endpoint-override

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

camel.component.aws-bedrock-agent-runtime.use-default-credentials-provider

Set whether the Bedrock Agent Runtime client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

Boolean

camel.component.aws-bedrock-agent-runtime.use-profile-credentials-provider

Set whether the Bedrock Agent Runtime client should expect to load credentials through a profile credentials provider.

false

Boolean

camel.component.aws-bedrock-agent-runtime.use-session-credentials

Set whether the Bedrock Agent Runtime client should expect to use Session Credentials. This is useful in a situation in which the user needs to assume an IAM role for doing operations in Bedrock.

false

Boolean

camel.component.aws-bedrock-agent.access-key

Amazon AWS Access Key.

String

camel.component.aws-bedrock-agent.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws-bedrock-agent.bedrock-agent-client

To use an existing configured AWS Bedrock Agent client. The option is a software.amazon.awssdk.services.bedrockagent.BedrockAgentClient type.

BedrockAgentClient

camel.component.aws-bedrock-agent.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.aws-bedrock-agent.configuration

Component configuration. The option is a org.apache.camel.component.aws2.bedrock.agent.BedrockAgentConfiguration type.

BedrockAgentConfiguration

camel.component.aws-bedrock-agent.data-source-id

Define the Data source Id we are going to use.

String

camel.component.aws-bedrock-agent.enabled

Whether to enable auto configuration of the aws-bedrock-agent component. This is enabled by default.

Boolean

camel.component.aws-bedrock-agent.health-check-consumer-enabled

Used for enabling or disabling all consumer based health checks from this component.

true

Boolean

camel.component.aws-bedrock-agent.health-check-producer-enabled

Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.

true

Boolean

camel.component.aws-bedrock-agent.ingestion-job-id

Define the Ingestion Job Id we want to track.

String

camel.component.aws-bedrock-agent.knowledge-base-id

Define the Knowledge Base Id we are going to use.

String

camel.component.aws-bedrock-agent.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws-bedrock-agent.model-id

Define the model Id we are going to use.

String

camel.component.aws-bedrock-agent.operation

The operation to perform.

BedrockAgentOperations

camel.component.aws-bedrock-agent.override-endpoint

Set the need for overriding the endpoint. This option needs to be used in combination with the uriEndpointOverride option.

false

Boolean

camel.component.aws-bedrock-agent.pojo-request

If we want to use a POJO request as body or not.

false

Boolean

camel.component.aws-bedrock-agent.profile-credentials-name

If using a profile credentials provider, this parameter will set the profile name.

false

String

camel.component.aws-bedrock-agent.proxy-host

To define a proxy host when instantiating the Bedrock Agent client.

String

camel.component.aws-bedrock-agent.proxy-port

To define a proxy port when instantiating the Bedrock Agent client.

Integer

camel.component.aws-bedrock-agent.proxy-protocol

To define a proxy protocol when instantiating the Bedrock Agent client.

Protocol

camel.component.aws-bedrock-agent.region

The region in which Bedrock Agent client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example, ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

camel.component.aws-bedrock-agent.secret-key

Amazon AWS Secret Key.

String

camel.component.aws-bedrock-agent.session-token

Amazon AWS Session Token used when the user needs to assume an IAM role.

String

camel.component.aws-bedrock-agent.trust-all-certificates

If we want to trust all certificates in case of overriding the endpoint.

false

Boolean

camel.component.aws-bedrock-agent.uri-endpoint-override

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

camel.component.aws-bedrock-agent.use-default-credentials-provider

Set whether the Bedrock Agent client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

Boolean

camel.component.aws-bedrock-agent.use-profile-credentials-provider

Set whether the Bedrock Agent client should expect to load credentials through a profile credentials provider.

false

Boolean

camel.component.aws-bedrock-agent.use-session-credentials

Set whether the Bedrock Agent client should expect to use Session Credentials. This is useful in a situation in which the user needs to assume an IAM role for doing operations in Bedrock.

false

Boolean

camel.component.aws-bedrock.access-key

Amazon AWS Access Key.

String

camel.component.aws-bedrock.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws-bedrock.bedrock-runtime-client

To use an existing configured AWS Bedrock Runtime client. The option is a software.amazon.awssdk.services.bedrockruntime.BedrockRuntimeClient type.

BedrockRuntimeClient

camel.component.aws-bedrock.configuration

Component configuration. The option is a org.apache.camel.component.aws2.bedrock.runtime.BedrockConfiguration type.

BedrockConfiguration

camel.component.aws-bedrock.enabled

Whether to enable auto configuration of the aws-bedrock component. This is enabled by default.

Boolean

camel.component.aws-bedrock.health-check-consumer-enabled

Used for enabling or disabling all consumer based health checks from this component.

true

Boolean

camel.component.aws-bedrock.health-check-producer-enabled

Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.

true

Boolean

camel.component.aws-bedrock.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws-bedrock.model-id

Define the model Id we are going to use.

String

camel.component.aws-bedrock.operation

The operation to perform.

BedrockOperations

camel.component.aws-bedrock.override-endpoint

Set the need for overriding the endpoint. This option needs to be used in combination with the uriEndpointOverride option.

false

Boolean

camel.component.aws-bedrock.pojo-request

If we want to use a POJO request as body or not.

false

Boolean

camel.component.aws-bedrock.profile-credentials-name

If using a profile credentials provider, this parameter will set the profile name.

false

String

camel.component.aws-bedrock.proxy-host

To define a proxy host when instantiating the Bedrock client.

String

camel.component.aws-bedrock.proxy-port

To define a proxy port when instantiating the Bedrock client.

Integer

camel.component.aws-bedrock.proxy-protocol

To define a proxy protocol when instantiating the Bedrock client.

Protocol

camel.component.aws-bedrock.region

The region in which Bedrock client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example, ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

camel.component.aws-bedrock.secret-key

Amazon AWS Secret Key.

String

camel.component.aws-bedrock.session-token

Amazon AWS Session Token used when the user needs to assume an IAM role.

String

camel.component.aws-bedrock.trust-all-certificates

If we want to trust all certificates in case of overriding the endpoint.

false

Boolean

camel.component.aws-bedrock.uri-endpoint-override

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

camel.component.aws-bedrock.use-default-credentials-provider

Set whether the Bedrock client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

Boolean

camel.component.aws-bedrock.use-profile-credentials-provider

Set whether the Bedrock client should expect to load credentials through a profile credentials provider.

false

Boolean

camel.component.aws-bedrock.use-session-credentials

Set whether the Bedrock client should expect to use Session Credentials. This is useful in a situation in which the user needs to assume an IAM role for doing operations in Bedrock.

false

Boolean
Back to top