Paho MQTT 5

URI format

paho-mqtt5:topic[?options]

Where topic is the name of the topic.

Configuring Options

Camel components are configured on two separate levels:

component level
endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

the Component DSL.
in a configuration file (application.properties, *.yaml files, etc).
directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.
They allow externalizing the configuration from the code.
They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The Paho MQTT 5 component supports 32 options, which are listed below.

Name	Description	Default	Type
automaticReconnect (common)	Sets whether the client will automatically attempt to reconnect to the server if the connection is lost. If set to false, the client will not attempt to automatically reconnect to the server in the event that the connection is lost. If set to true, in the event that the connection is lost, the client will attempt to reconnect to the server. It will initially wait 1 second before it attempts to reconnect, for every failed reconnect attempt, the delay will double until it is at 2 minutes at which point the delay will stay at 2 minutes.	true	boolean
brokerUrl (common)	The URL of the MQTT broker.	tcp://localhost:1883	String
cleanStart (common)	Sets whether the client and server should remember state across restarts and reconnects. If set to false both the client and server will maintain state across restarts of the client, the server and the connection. As state is maintained: Message delivery will be reliable meeting the specified QOS even if the client, server or connection are restarted. The server will treat a subscription as durable. If set to true the client and server will not maintain state across restarts of the client, the server or the connection. This means Message delivery to the specified QOS cannot be maintained if the client, server or connection are restarted The server will treat a subscription as non-durable.	true	boolean
clientId (common)	MQTT client identifier. The identifier must be unique.		String
configuration (common)	To use the shared Paho configuration.		PahoMqtt5Configuration
connectionTimeout (common)	Sets the connection timeout value. This value, measured in seconds, defines the maximum time interval the client will wait for the network connection to the MQTT server to be established. The default timeout is 30 seconds. A value of 0 disables timeout processing meaning the client will wait until the network connection is made successfully or fails.	30	int
filePersistenceDirectory (common)	Base directory used by file persistence. Will by default use user directory.		String
keepAliveInterval (common)	Sets the keep alive interval. This value, measured in seconds, defines the maximum time interval between messages sent or received. It enables the client to detect if the server is no longer available, without having to wait for the TCP/IP timeout. The client will ensure that at least one message travels across the network within each keep alive period. In the absence of a data-related message during the time period, the client sends a very small ping message, which the server will acknowledge. A value of 0 disables keepalive processing in the client. The default value is 60 seconds.	60	int
maxReconnectDelay (common)	Get the maximum time (in millis) to wait between reconnects.	128000	int
persistence (common)	Client persistence to be used - memory or file. Enum values: FILE MEMORY	MEMORY	PahoMqtt5Persistence
qos (common)	Client quality of service level (0-2).	2	int
receiveMaximum (common)	Sets the Receive Maximum. This value represents the limit of QoS 1 and QoS 2 publications that the client is willing to process concurrently. There is no mechanism to limit the number of QoS 0 publications that the Server might try to send. The default value is 65535.	65535	int
retained (common)	Retain option.	false	boolean
serverURIs (common)	Set a list of one or more serverURIs the client may connect to. Multiple servers can be separated by comma. Each serverURI specifies the address of a server that the client may connect to. Two types of connection are supported tcp:// for a TCP connection and ssl:// for a TCP connection secured by SSL/TLS. For example: tcp://localhost:1883 ssl://localhost:8883 If the port is not specified, it will default to 1883 for tcp:// URIs, and 8883 for ssl:// URIs. If serverURIs is set then it overrides the serverURI parameter passed in on the constructor of the MQTT client. When an attempt to connect is initiated the client will start with the first serverURI in the list and work through the list until a connection is established with a server. If a connection cannot be made to any of the servers then the connect attempt fails. Specifying a list of servers that a client may connect to has several uses: High Availability and reliable message delivery Some MQTT servers support a high availability feature where two or more equal MQTT servers share state. An MQTT client can connect to any of the equal servers and be assured that messages are reliably delivered and durable subscriptions are maintained no matter which server the client connects to. The cleansession flag must be set to false if durable subscriptions and/or reliable message delivery is required. Hunt List A set of servers may be specified that are not equal (as in the high availability option). As no state is shared across the servers reliable message delivery and durable subscriptions are not valid. The cleansession flag must be set to true if the hunt list mode is used.		String
sessionExpiryInterval (common)	Sets the Session Expiry Interval. This value, measured in seconds, defines the maximum time that the broker will maintain the session for once the client disconnects. Clients should only connect with a long Session Expiry interval if they intend to connect to the server at some later point in time. By default this value is -1 and so will not be sent, in this case, the session will not expire. If a 0 is sent, the session will end immediately once the Network Connection is closed. When the client has determined that it has no longer any use for the session, it should disconnect with a Session Expiry Interval set to 0.	-1	long
willMqttProperties (common)	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The MQTT properties set for the message.		MqttProperties
willPayload (common)	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The byte payload for the message.		String
willQos (common)	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The quality of service to publish the message at (0, 1 or 2).	1	int
willRetained (common)	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. Whether or not the message should be retained.	false	boolean
willTopic (common)	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to.		String
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
client (advanced)	To use a shared Paho client.		MqttClient
customWebSocketHeaders (advanced)	Sets the Custom WebSocket Headers for the WebSocket Connection.		Map
executorServiceTimeout (advanced)	Set the time in seconds that the executor service should wait when terminating before forcefully terminating. It is not recommended to change this value unless you are absolutely sure that you need to.	1	int
httpsHostnameVerificationEnabled (security)	Whether SSL HostnameVerifier is enabled or not. The default value is true.	true	boolean
password (security)	Password to be used for authentication against the MQTT broker.		String
socketFactory (security)	Sets the SocketFactory to use. This allows an application to apply its own policies around the creation of network sockets. If using an SSL connection, an SSLSocketFactory can be used to supply application-specific security settings.		SocketFactory
sslClientProps (security)	Sets the SSL properties for the connection. Note that these properties are only valid if an implementation of the Java Secure Socket Extensions (JSSE) is available. These properties are not used if a custom SocketFactory has been set. The following properties can be used: com.ibm.ssl.protocol One of: SSL, SSLv3, TLS, TLSv1, SSL_TLS. com.ibm.ssl.contextProvider Underlying JSSE provider. For example IBMJSSE2 or SunJSSE com.ibm.ssl.keyStore The name of the file that contains the KeyStore object that you want the KeyManager to use. For example /mydir/etc/key.p12 com.ibm.ssl.keyStorePassword The password for the KeyStore object that you want the KeyManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.keyStoreType Type of key store, for example PKCS12, JKS, or JCEKS. com.ibm.ssl.keyStoreProvider Key store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.trustStore The name of the file that contains the KeyStore object that you want the TrustManager to use. com.ibm.ssl.trustStorePassword The password for the TrustStore object that you want the TrustManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.trustStoreType The type of KeyStore object that you want the default TrustManager to use. Same possible values as keyStoreType. com.ibm.ssl.trustStoreProvider Trust store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.enabledCipherSuites A list of which ciphers are enabled. Values are dependent on the provider, for example: SSL_RSA_WITH_AES_128_CBC_SHA;SSL_RSA_WITH_3DES_EDE_CBC_SHA. com.ibm.ssl.keyManager Sets the algorithm that will be used to instantiate a KeyManagerFactory object instead of using the default algorithm available in the platform. Example values: IbmX509 or IBMJ9X509. com.ibm.ssl.trustManager Sets the algorithm that will be used to instantiate a TrustManagerFactory object instead of using the default algorithm available in the platform. Example values: PKIX or IBMJ9X509.		Properties
sslHostnameVerifier (security)	Sets the HostnameVerifier for the SSL connection. Note that it will be used after handshake on a connection and you should do actions by yourself when hostname is verified error. There is no default HostnameVerifier.		HostnameVerifier
userName (security)	Username to be used for authentication against the MQTT broker.		String

Name

Description

Default

Type

automaticReconnect (common)

Sets whether the client will automatically attempt to reconnect to the server if the connection is lost. If set to false, the client will not attempt to automatically reconnect to the server in the event that the connection is lost. If set to true, in the event that the connection is lost, the client will attempt to reconnect to the server. It will initially wait 1 second before it attempts to reconnect, for every failed reconnect attempt, the delay will double until it is at 2 minutes at which point the delay will stay at 2 minutes.

true

boolean

brokerUrl (common)

The URL of the MQTT broker.

tcp://localhost:1883

String

cleanStart (common)

Sets whether the client and server should remember state across restarts and reconnects. If set to false both the client and server will maintain state across restarts of the client, the server and the connection. As state is maintained: Message delivery will be reliable meeting the specified QOS even if the client, server or connection are restarted. The server will treat a subscription as durable. If set to true the client and server will not maintain state across restarts of the client, the server or the connection. This means Message delivery to the specified QOS cannot be maintained if the client, server or connection are restarted The server will treat a subscription as non-durable.

true

boolean

clientId (common)

MQTT client identifier. The identifier must be unique.

String

configuration (common)

To use the shared Paho configuration.

PahoMqtt5Configuration

connectionTimeout (common)

Sets the connection timeout value. This value, measured in seconds, defines the maximum time interval the client will wait for the network connection to the MQTT server to be established. The default timeout is 30 seconds. A value of 0 disables timeout processing meaning the client will wait until the network connection is made successfully or fails.

30

int

filePersistenceDirectory (common)

Base directory used by file persistence. Will by default use user directory.

String

keepAliveInterval (common)

Sets the keep alive interval. This value, measured in seconds, defines the maximum time interval between messages sent or received. It enables the client to detect if the server is no longer available, without having to wait for the TCP/IP timeout. The client will ensure that at least one message travels across the network within each keep alive period. In the absence of a data-related message during the time period, the client sends a very small ping message, which the server will acknowledge. A value of 0 disables keepalive processing in the client. The default value is 60 seconds.

60

int

maxReconnectDelay (common)

Get the maximum time (in millis) to wait between reconnects.

128000

int

persistence (common)

Client persistence to be used - memory or file.

Enum values:

FILE
MEMORY

MEMORY

PahoMqtt5Persistence

qos (common)

Client quality of service level (0-2).

2

int

receiveMaximum (common)

Sets the Receive Maximum. This value represents the limit of QoS 1 and QoS 2 publications that the client is willing to process concurrently. There is no mechanism to limit the number of QoS 0 publications that the Server might try to send. The default value is 65535.

65535

int

retained (common)

Retain option.

false

boolean

serverURIs (common)

Set a list of one or more serverURIs the client may connect to. Multiple servers can be separated by comma. Each serverURI specifies the address of a server that the client may connect to. Two types of connection are supported tcp:// for a TCP connection and ssl:// for a TCP connection secured by SSL/TLS. For example: tcp://localhost:1883 ssl://localhost:8883 If the port is not specified, it will default to 1883 for tcp:// URIs, and 8883 for ssl:// URIs. If serverURIs is set then it overrides the serverURI parameter passed in on the constructor of the MQTT client. When an attempt to connect is initiated the client will start with the first serverURI in the list and work through the list until a connection is established with a server. If a connection cannot be made to any of the servers then the connect attempt fails. Specifying a list of servers that a client may connect to has several uses: High Availability and reliable message delivery Some MQTT servers support a high availability feature where two or more equal MQTT servers share state. An MQTT client can connect to any of the equal servers and be assured that messages are reliably delivered and durable subscriptions are maintained no matter which server the client connects to. The cleansession flag must be set to false if durable subscriptions and/or reliable message delivery is required. Hunt List A set of servers may be specified that are not equal (as in the high availability option). As no state is shared across the servers reliable message delivery and durable subscriptions are not valid. The cleansession flag must be set to true if the hunt list mode is used.

String

sessionExpiryInterval (common)

Sets the Session Expiry Interval. This value, measured in seconds, defines the maximum time that the broker will maintain the session for once the client disconnects. Clients should only connect with a long Session Expiry interval if they intend to connect to the server at some later point in time. By default this value is -1 and so will not be sent, in this case, the session will not expire. If a 0 is sent, the session will end immediately once the Network Connection is closed. When the client has determined that it has no longer any use for the session, it should disconnect with a Session Expiry Interval set to 0.

-1

long

willMqttProperties (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The MQTT properties set for the message.

MqttProperties

willPayload (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The byte payload for the message.

String

willQos (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The quality of service to publish the message at (0, 1 or 2).

1

int

willRetained (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. Whether or not the message should be retained.

false

boolean

willTopic (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to.

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

client (advanced)

To use a shared Paho client.

MqttClient

customWebSocketHeaders (advanced)

Sets the Custom WebSocket Headers for the WebSocket Connection.

Map

executorServiceTimeout (advanced)

Set the time in seconds that the executor service should wait when terminating before forcefully terminating. It is not recommended to change this value unless you are absolutely sure that you need to.

1

int

httpsHostnameVerificationEnabled (security)

Whether SSL HostnameVerifier is enabled or not. The default value is true.

true

boolean

password (security)

Password to be used for authentication against the MQTT broker.

String

socketFactory (security)

Sets the SocketFactory to use. This allows an application to apply its own policies around the creation of network sockets. If using an SSL connection, an SSLSocketFactory can be used to supply application-specific security settings.

SocketFactory

sslClientProps (security)

Sets the SSL properties for the connection. Note that these properties are only valid if an implementation of the Java Secure Socket Extensions (JSSE) is available. These properties are not used if a custom SocketFactory has been set. The following properties can be used: com.ibm.ssl.protocol One of: SSL, SSLv3, TLS, TLSv1, SSL_TLS. com.ibm.ssl.contextProvider Underlying JSSE provider. For example IBMJSSE2 or SunJSSE com.ibm.ssl.keyStore The name of the file that contains the KeyStore object that you want the KeyManager to use. For example /mydir/etc/key.p12 com.ibm.ssl.keyStorePassword The password for the KeyStore object that you want the KeyManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.keyStoreType Type of key store, for example PKCS12, JKS, or JCEKS. com.ibm.ssl.keyStoreProvider Key store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.trustStore The name of the file that contains the KeyStore object that you want the TrustManager to use. com.ibm.ssl.trustStorePassword The password for the TrustStore object that you want the TrustManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.trustStoreType The type of KeyStore object that you want the default TrustManager to use. Same possible values as keyStoreType. com.ibm.ssl.trustStoreProvider Trust store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.enabledCipherSuites A list of which ciphers are enabled. Values are dependent on the provider, for example: SSL_RSA_WITH_AES_128_CBC_SHA;SSL_RSA_WITH_3DES_EDE_CBC_SHA. com.ibm.ssl.keyManager Sets the algorithm that will be used to instantiate a KeyManagerFactory object instead of using the default algorithm available in the platform. Example values: IbmX509 or IBMJ9X509. com.ibm.ssl.trustManager Sets the algorithm that will be used to instantiate a TrustManagerFactory object instead of using the default algorithm available in the platform. Example values: PKIX or IBMJ9X509.

Properties

sslHostnameVerifier (security)

Sets the HostnameVerifier for the SSL connection. Note that it will be used after handshake on a connection and you should do actions by yourself when hostname is verified error. There is no default HostnameVerifier.

HostnameVerifier

userName (security)

Username to be used for authentication against the MQTT broker.

String

Endpoint Options

The Paho MQTT 5 endpoint is configured using URI syntax:

paho-mqtt5:topic

With the following path and query parameters:

Path Parameters (1 parameters)

Name	Description	Default	Type
topic (common)	Required Name of the topic.		String

Name

Description

Default

Type

topic (common)

Required Name of the topic.

String

Query Parameters (32 parameters)

Name	Description	Default	Type
automaticReconnect (common)	Sets whether the client will automatically attempt to reconnect to the server if the connection is lost. If set to false, the client will not attempt to automatically reconnect to the server in the event that the connection is lost. If set to true, in the event that the connection is lost, the client will attempt to reconnect to the server. It will initially wait 1 second before it attempts to reconnect, for every failed reconnect attempt, the delay will double until it is at 2 minutes at which point the delay will stay at 2 minutes.	true	boolean
brokerUrl (common)	The URL of the MQTT broker.	tcp://localhost:1883	String
cleanStart (common)	Sets whether the client and server should remember state across restarts and reconnects. If set to false both the client and server will maintain state across restarts of the client, the server and the connection. As state is maintained: Message delivery will be reliable meeting the specified QOS even if the client, server or connection are restarted. The server will treat a subscription as durable. If set to true the client and server will not maintain state across restarts of the client, the server or the connection. This means Message delivery to the specified QOS cannot be maintained if the client, server or connection are restarted The server will treat a subscription as non-durable.	true	boolean
clientId (common)	MQTT client identifier. The identifier must be unique.		String
connectionTimeout (common)	Sets the connection timeout value. This value, measured in seconds, defines the maximum time interval the client will wait for the network connection to the MQTT server to be established. The default timeout is 30 seconds. A value of 0 disables timeout processing meaning the client will wait until the network connection is made successfully or fails.	30	int
filePersistenceDirectory (common)	Base directory used by file persistence. Will by default use user directory.		String
keepAliveInterval (common)	Sets the keep alive interval. This value, measured in seconds, defines the maximum time interval between messages sent or received. It enables the client to detect if the server is no longer available, without having to wait for the TCP/IP timeout. The client will ensure that at least one message travels across the network within each keep alive period. In the absence of a data-related message during the time period, the client sends a very small ping message, which the server will acknowledge. A value of 0 disables keepalive processing in the client. The default value is 60 seconds.	60	int
maxReconnectDelay (common)	Get the maximum time (in millis) to wait between reconnects.	128000	int
persistence (common)	Client persistence to be used - memory or file. Enum values: FILE MEMORY	MEMORY	PahoMqtt5Persistence
qos (common)	Client quality of service level (0-2).	2	int
receiveMaximum (common)	Sets the Receive Maximum. This value represents the limit of QoS 1 and QoS 2 publications that the client is willing to process concurrently. There is no mechanism to limit the number of QoS 0 publications that the Server might try to send. The default value is 65535.	65535	int
retained (common)	Retain option.	false	boolean
serverURIs (common)	Set a list of one or more serverURIs the client may connect to. Multiple servers can be separated by comma. Each serverURI specifies the address of a server that the client may connect to. Two types of connection are supported tcp:// for a TCP connection and ssl:// for a TCP connection secured by SSL/TLS. For example: tcp://localhost:1883 ssl://localhost:8883 If the port is not specified, it will default to 1883 for tcp:// URIs, and 8883 for ssl:// URIs. If serverURIs is set then it overrides the serverURI parameter passed in on the constructor of the MQTT client. When an attempt to connect is initiated the client will start with the first serverURI in the list and work through the list until a connection is established with a server. If a connection cannot be made to any of the servers then the connect attempt fails. Specifying a list of servers that a client may connect to has several uses: High Availability and reliable message delivery Some MQTT servers support a high availability feature where two or more equal MQTT servers share state. An MQTT client can connect to any of the equal servers and be assured that messages are reliably delivered and durable subscriptions are maintained no matter which server the client connects to. The cleansession flag must be set to false if durable subscriptions and/or reliable message delivery is required. Hunt List A set of servers may be specified that are not equal (as in the high availability option). As no state is shared across the servers reliable message delivery and durable subscriptions are not valid. The cleansession flag must be set to true if the hunt list mode is used.		String
sessionExpiryInterval (common)	Sets the Session Expiry Interval. This value, measured in seconds, defines the maximum time that the broker will maintain the session for once the client disconnects. Clients should only connect with a long Session Expiry interval if they intend to connect to the server at some later point in time. By default this value is -1 and so will not be sent, in this case, the session will not expire. If a 0 is sent, the session will end immediately once the Network Connection is closed. When the client has determined that it has no longer any use for the session, it should disconnect with a Session Expiry Interval set to 0.	-1	long
willMqttProperties (common)	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The MQTT properties set for the message.		MqttProperties
willPayload (common)	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The byte payload for the message.		String
willQos (common)	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The quality of service to publish the message at (0, 1 or 2).	1	int
willRetained (common)	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. Whether or not the message should be retained.	false	boolean
willTopic (common)	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to.		String
bridgeErrorHandler (consumer (advanced))	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
exceptionHandler (consumer (advanced))	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer (advanced))	Sets the exchange pattern when the consumer creates an exchange. Enum values: InOnly InOut		ExchangePattern
lazyStartProducer (producer (advanced))	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
client (advanced)	To use an existing mqtt client.		MqttClient
customWebSocketHeaders (advanced)	Sets the Custom WebSocket Headers for the WebSocket Connection.		Map
executorServiceTimeout (advanced)	Set the time in seconds that the executor service should wait when terminating before forcefully terminating. It is not recommended to change this value unless you are absolutely sure that you need to.	1	int
httpsHostnameVerificationEnabled (security)	Whether SSL HostnameVerifier is enabled or not. The default value is true.	true	boolean
password (security)	Password to be used for authentication against the MQTT broker.		String
socketFactory (security)	Sets the SocketFactory to use. This allows an application to apply its own policies around the creation of network sockets. If using an SSL connection, an SSLSocketFactory can be used to supply application-specific security settings.		SocketFactory
sslClientProps (security)	Sets the SSL properties for the connection. Note that these properties are only valid if an implementation of the Java Secure Socket Extensions (JSSE) is available. These properties are not used if a custom SocketFactory has been set. The following properties can be used: com.ibm.ssl.protocol One of: SSL, SSLv3, TLS, TLSv1, SSL_TLS. com.ibm.ssl.contextProvider Underlying JSSE provider. For example IBMJSSE2 or SunJSSE com.ibm.ssl.keyStore The name of the file that contains the KeyStore object that you want the KeyManager to use. For example /mydir/etc/key.p12 com.ibm.ssl.keyStorePassword The password for the KeyStore object that you want the KeyManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.keyStoreType Type of key store, for example PKCS12, JKS, or JCEKS. com.ibm.ssl.keyStoreProvider Key store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.trustStore The name of the file that contains the KeyStore object that you want the TrustManager to use. com.ibm.ssl.trustStorePassword The password for the TrustStore object that you want the TrustManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.trustStoreType The type of KeyStore object that you want the default TrustManager to use. Same possible values as keyStoreType. com.ibm.ssl.trustStoreProvider Trust store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.enabledCipherSuites A list of which ciphers are enabled. Values are dependent on the provider, for example: SSL_RSA_WITH_AES_128_CBC_SHA;SSL_RSA_WITH_3DES_EDE_CBC_SHA. com.ibm.ssl.keyManager Sets the algorithm that will be used to instantiate a KeyManagerFactory object instead of using the default algorithm available in the platform. Example values: IbmX509 or IBMJ9X509. com.ibm.ssl.trustManager Sets the algorithm that will be used to instantiate a TrustManagerFactory object instead of using the default algorithm available in the platform. Example values: PKIX or IBMJ9X509.		Properties
sslHostnameVerifier (security)	Sets the HostnameVerifier for the SSL connection. Note that it will be used after handshake on a connection and you should do actions by yourself when hostname is verified error. There is no default HostnameVerifier.		HostnameVerifier
userName (security)	Username to be used for authentication against the MQTT broker.		String

Name

Description

Default

Type

automaticReconnect (common)

Sets whether the client will automatically attempt to reconnect to the server if the connection is lost. If set to false, the client will not attempt to automatically reconnect to the server in the event that the connection is lost. If set to true, in the event that the connection is lost, the client will attempt to reconnect to the server. It will initially wait 1 second before it attempts to reconnect, for every failed reconnect attempt, the delay will double until it is at 2 minutes at which point the delay will stay at 2 minutes.

true

boolean

brokerUrl (common)

The URL of the MQTT broker.

tcp://localhost:1883

String

cleanStart (common)

Sets whether the client and server should remember state across restarts and reconnects. If set to false both the client and server will maintain state across restarts of the client, the server and the connection. As state is maintained: Message delivery will be reliable meeting the specified QOS even if the client, server or connection are restarted. The server will treat a subscription as durable. If set to true the client and server will not maintain state across restarts of the client, the server or the connection. This means Message delivery to the specified QOS cannot be maintained if the client, server or connection are restarted The server will treat a subscription as non-durable.

true

boolean

clientId (common)

MQTT client identifier. The identifier must be unique.

String

connectionTimeout (common)

Sets the connection timeout value. This value, measured in seconds, defines the maximum time interval the client will wait for the network connection to the MQTT server to be established. The default timeout is 30 seconds. A value of 0 disables timeout processing meaning the client will wait until the network connection is made successfully or fails.

30

int

filePersistenceDirectory (common)

Base directory used by file persistence. Will by default use user directory.

String

keepAliveInterval (common)

Sets the keep alive interval. This value, measured in seconds, defines the maximum time interval between messages sent or received. It enables the client to detect if the server is no longer available, without having to wait for the TCP/IP timeout. The client will ensure that at least one message travels across the network within each keep alive period. In the absence of a data-related message during the time period, the client sends a very small ping message, which the server will acknowledge. A value of 0 disables keepalive processing in the client. The default value is 60 seconds.

60

int

maxReconnectDelay (common)

Get the maximum time (in millis) to wait between reconnects.

128000

int

persistence (common)

Client persistence to be used - memory or file.

Enum values:

FILE
MEMORY

MEMORY

PahoMqtt5Persistence

qos (common)

Client quality of service level (0-2).

2

int

receiveMaximum (common)

Sets the Receive Maximum. This value represents the limit of QoS 1 and QoS 2 publications that the client is willing to process concurrently. There is no mechanism to limit the number of QoS 0 publications that the Server might try to send. The default value is 65535.

65535

int

retained (common)

Retain option.

false

boolean

serverURIs (common)

Set a list of one or more serverURIs the client may connect to. Multiple servers can be separated by comma. Each serverURI specifies the address of a server that the client may connect to. Two types of connection are supported tcp:// for a TCP connection and ssl:// for a TCP connection secured by SSL/TLS. For example: tcp://localhost:1883 ssl://localhost:8883 If the port is not specified, it will default to 1883 for tcp:// URIs, and 8883 for ssl:// URIs. If serverURIs is set then it overrides the serverURI parameter passed in on the constructor of the MQTT client. When an attempt to connect is initiated the client will start with the first serverURI in the list and work through the list until a connection is established with a server. If a connection cannot be made to any of the servers then the connect attempt fails. Specifying a list of servers that a client may connect to has several uses: High Availability and reliable message delivery Some MQTT servers support a high availability feature where two or more equal MQTT servers share state. An MQTT client can connect to any of the equal servers and be assured that messages are reliably delivered and durable subscriptions are maintained no matter which server the client connects to. The cleansession flag must be set to false if durable subscriptions and/or reliable message delivery is required. Hunt List A set of servers may be specified that are not equal (as in the high availability option). As no state is shared across the servers reliable message delivery and durable subscriptions are not valid. The cleansession flag must be set to true if the hunt list mode is used.

String

sessionExpiryInterval (common)

Sets the Session Expiry Interval. This value, measured in seconds, defines the maximum time that the broker will maintain the session for once the client disconnects. Clients should only connect with a long Session Expiry interval if they intend to connect to the server at some later point in time. By default this value is -1 and so will not be sent, in this case, the session will not expire. If a 0 is sent, the session will end immediately once the Network Connection is closed. When the client has determined that it has no longer any use for the session, it should disconnect with a Session Expiry Interval set to 0.

-1

long

willMqttProperties (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The MQTT properties set for the message.

MqttProperties

willPayload (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The byte payload for the message.

String

willQos (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The quality of service to publish the message at (0, 1 or 2).

1

int

willRetained (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. Whether or not the message should be retained.

false

boolean

willTopic (common)

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to.

String

bridgeErrorHandler (consumer (advanced))

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

InOnly
InOut

ExchangePattern

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

client (advanced)

To use an existing mqtt client.

MqttClient

customWebSocketHeaders (advanced)

Sets the Custom WebSocket Headers for the WebSocket Connection.

Map

executorServiceTimeout (advanced)

Set the time in seconds that the executor service should wait when terminating before forcefully terminating. It is not recommended to change this value unless you are absolutely sure that you need to.

1

int

httpsHostnameVerificationEnabled (security)

Whether SSL HostnameVerifier is enabled or not. The default value is true.

true

boolean

password (security)

Password to be used for authentication against the MQTT broker.

String

socketFactory (security)

Sets the SocketFactory to use. This allows an application to apply its own policies around the creation of network sockets. If using an SSL connection, an SSLSocketFactory can be used to supply application-specific security settings.

SocketFactory

sslClientProps (security)

Sets the SSL properties for the connection. Note that these properties are only valid if an implementation of the Java Secure Socket Extensions (JSSE) is available. These properties are not used if a custom SocketFactory has been set. The following properties can be used: com.ibm.ssl.protocol One of: SSL, SSLv3, TLS, TLSv1, SSL_TLS. com.ibm.ssl.contextProvider Underlying JSSE provider. For example IBMJSSE2 or SunJSSE com.ibm.ssl.keyStore The name of the file that contains the KeyStore object that you want the KeyManager to use. For example /mydir/etc/key.p12 com.ibm.ssl.keyStorePassword The password for the KeyStore object that you want the KeyManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.keyStoreType Type of key store, for example PKCS12, JKS, or JCEKS. com.ibm.ssl.keyStoreProvider Key store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.trustStore The name of the file that contains the KeyStore object that you want the TrustManager to use. com.ibm.ssl.trustStorePassword The password for the TrustStore object that you want the TrustManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.trustStoreType The type of KeyStore object that you want the default TrustManager to use. Same possible values as keyStoreType. com.ibm.ssl.trustStoreProvider Trust store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.enabledCipherSuites A list of which ciphers are enabled. Values are dependent on the provider, for example: SSL_RSA_WITH_AES_128_CBC_SHA;SSL_RSA_WITH_3DES_EDE_CBC_SHA. com.ibm.ssl.keyManager Sets the algorithm that will be used to instantiate a KeyManagerFactory object instead of using the default algorithm available in the platform. Example values: IbmX509 or IBMJ9X509. com.ibm.ssl.trustManager Sets the algorithm that will be used to instantiate a TrustManagerFactory object instead of using the default algorithm available in the platform. Example values: PKIX or IBMJ9X509.

Properties

sslHostnameVerifier (security)

Sets the HostnameVerifier for the SSL connection. Note that it will be used after handshake on a connection and you should do actions by yourself when hostname is verified error. There is no default HostnameVerifier.

HostnameVerifier

userName (security)

Username to be used for authentication against the MQTT broker.

String

Message Headers

The Paho MQTT 5 component supports 6 message header(s), which is/are listed below:

Name Description Default Type

Name	Description	Type
CamelMqttTopic (consumer) Constant: `MQTT_TOPIC`	The name of the topic.	String
CamelMqttQoS (consumer) Constant: `MQTT_QOS`	The quality of service of the incoming message.	Integer
CamelPahoMqtt5Qos (producer) Constant: `CAMEL_PAHO_MSG_QOS`	The client quality of service level (0-2).	Integer
CamelPahoMqtt5Retained (producer) Constant: `CAMEL_PAHO_MSG_RETAINED`	Retain option.	Boolean
CamelPahoMqtt5OverrideTopic (producer) Constant: `CAMEL_PAHO_OVERRIDE_TOPIC`	The name of topic to override and send to instead of topic specified on endpoint.	String
CamelPahoMqtt5MsgProperties (producer) Constant: `CAMEL_PAHO_MSG_PROPERTIES`	Consumer: The properties set on the incoming message. Producer: The properties to be set on the outgoing message.	MqttProperties

CamelMqttTopic (consumer)

Constant: MQTT_TOPIC

The name of the topic.

String

CamelMqttQoS (consumer)

Constant: MQTT_QOS

The quality of service of the incoming message.

Integer

CamelPahoMqtt5Qos (producer)

Constant: CAMEL_PAHO_MSG_QOS

The client quality of service level (0-2).

Integer

CamelPahoMqtt5Retained (producer)

Constant: CAMEL_PAHO_MSG_RETAINED

Retain option.

Boolean

CamelPahoMqtt5OverrideTopic (producer)

Constant: CAMEL_PAHO_OVERRIDE_TOPIC

The name of topic to override and send to instead of topic specified on endpoint.

String

CamelPahoMqtt5MsgProperties (producer)

Constant: CAMEL_PAHO_MSG_PROPERTIES

Consumer: The properties set on the incoming message. Producer: The properties to be set on the outgoing message.

MqttProperties

Usage

Default payload type

By default, the Camel Paho component operates on the binary payloads extracted out of (or put into) the MQTT message:

// Receive payload
byte[] payload = (byte[]) consumerTemplate.receiveBody("paho-mqtt5:topic");

// Send payload
byte[] payload = "message".getBytes();
producerTemplate.sendBody("paho-mqtt5:topic", payload);

Of course, Camel build-in type conversion API can perform the automatic data type transformations for you. In the example below Camel automatically converts binary payload into String (and conversely):

// Receive payload
String payload = consumerTemplate.receiveBody("paho-mqtt5:topic", String.class);

// Send payload
String payload = "message";
producerTemplate.sendBody("paho-mqtt5:topic", payload);

Examples

For example, the following snippet reads messages from the MQTT broker installed on the same host as the Camel router:

from("paho-mqtt5:some/queue")
    .to("mock:test");

While the snippet below sends a message to the MQTT broker:

from("direct:test")
    .to("paho-mqtt5:some/target/queue");

For example, this is how to read messages from the remote MQTT broker:

from("paho-mqtt5:some/queue?brokerUrl=tcp://iot.eclipse.org:1883")
    .to("mock:test");

And here we override the default topic and set to a dynamic topic

from("direct:test")
    .setHeader(PahoConstants.CAMEL_PAHO_OVERRIDE_TOPIC, simple("${header.customerId}"))
    .to("paho-mqtt5:some/target/queue");

Spring Boot Auto-Configuration

When using paho-mqtt5 with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-paho-mqtt5-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 33 options, which are listed below.

Name	Description	Default	Type
camel.component.paho-mqtt5.automatic-reconnect	Sets whether the client will automatically attempt to reconnect to the server if the connection is lost. If set to false, the client will not attempt to automatically reconnect to the server in the event that the connection is lost. If set to true, in the event that the connection is lost, the client will attempt to reconnect to the server. It will initially wait 1 second before it attempts to reconnect, for every failed reconnect attempt, the delay will double until it is at 2 minutes at which point the delay will stay at 2 minutes.	true	Boolean
camel.component.paho-mqtt5.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.paho-mqtt5.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.paho-mqtt5.broker-url	The URL of the MQTT broker.	tcp://localhost:1883	String
camel.component.paho-mqtt5.clean-start	Sets whether the client and server should remember state across restarts and reconnects. If set to false both the client and server will maintain state across restarts of the client, the server and the connection. As state is maintained: Message delivery will be reliable meeting the specified QOS even if the client, server or connection are restarted. The server will treat a subscription as durable. If set to true the client and server will not maintain state across restarts of the client, the server or the connection. This means Message delivery to the specified QOS cannot be maintained if the client, server or connection are restarted The server will treat a subscription as non-durable.	true	Boolean
camel.component.paho-mqtt5.client	To use a shared Paho client. The option is a org.eclipse.paho.mqttv5.client.MqttClient type.		MqttClient
camel.component.paho-mqtt5.client-id	MQTT client identifier. The identifier must be unique.		String
camel.component.paho-mqtt5.configuration	To use the shared Paho configuration. The option is a org.apache.camel.component.paho.mqtt5.PahoMqtt5Configuration type.		PahoMqtt5Configuration
camel.component.paho-mqtt5.connection-timeout	Sets the connection timeout value. This value, measured in seconds, defines the maximum time interval the client will wait for the network connection to the MQTT server to be established. The default timeout is 30 seconds. A value of 0 disables timeout processing meaning the client will wait until the network connection is made successfully or fails.	30	Integer
camel.component.paho-mqtt5.custom-web-socket-headers	Sets the Custom WebSocket Headers for the WebSocket Connection.		Map
camel.component.paho-mqtt5.enabled	Whether to enable auto configuration of the paho-mqtt5 component. This is enabled by default.		Boolean
camel.component.paho-mqtt5.executor-service-timeout	Set the time in seconds that the executor service should wait when terminating before forcefully terminating. It is not recommended to change this value unless you are absolutely sure that you need to.	1	Integer
camel.component.paho-mqtt5.file-persistence-directory	Base directory used by file persistence. Will by default use user directory.		String
camel.component.paho-mqtt5.https-hostname-verification-enabled	Whether SSL HostnameVerifier is enabled or not. The default value is true.	true	Boolean
camel.component.paho-mqtt5.keep-alive-interval	Sets the keep alive interval. This value, measured in seconds, defines the maximum time interval between messages sent or received. It enables the client to detect if the server is no longer available, without having to wait for the TCP/IP timeout. The client will ensure that at least one message travels across the network within each keep alive period. In the absence of a data-related message during the time period, the client sends a very small ping message, which the server will acknowledge. A value of 0 disables keepalive processing in the client. The default value is 60 seconds.	60	Integer
camel.component.paho-mqtt5.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.paho-mqtt5.max-reconnect-delay	Get the maximum time (in millis) to wait between reconnects.	128000	Integer
camel.component.paho-mqtt5.password	Password to be used for authentication against the MQTT broker.		String
camel.component.paho-mqtt5.persistence	Client persistence to be used - memory or file.		PahoMqtt5Persistence
camel.component.paho-mqtt5.qos	Client quality of service level (0-2).	2	Integer
camel.component.paho-mqtt5.receive-maximum	Sets the Receive Maximum. This value represents the limit of QoS 1 and QoS 2 publications that the client is willing to process concurrently. There is no mechanism to limit the number of QoS 0 publications that the Server might try to send. The default value is 65535.	65535	Integer
camel.component.paho-mqtt5.retained	Retain option.	false	Boolean
camel.component.paho-mqtt5.server-u-r-is	Set a list of one or more serverURIs the client may connect to. Multiple servers can be separated by comma. Each serverURI specifies the address of a server that the client may connect to. Two types of connection are supported tcp:// for a TCP connection and ssl:// for a TCP connection secured by SSL/TLS. For example: tcp://localhost:1883 ssl://localhost:8883 If the port is not specified, it will default to 1883 for tcp:// URIs, and 8883 for ssl:// URIs. If serverURIs is set then it overrides the serverURI parameter passed in on the constructor of the MQTT client. When an attempt to connect is initiated the client will start with the first serverURI in the list and work through the list until a connection is established with a server. If a connection cannot be made to any of the servers then the connect attempt fails. Specifying a list of servers that a client may connect to has several uses: High Availability and reliable message delivery Some MQTT servers support a high availability feature where two or more equal MQTT servers share state. An MQTT client can connect to any of the equal servers and be assured that messages are reliably delivered and durable subscriptions are maintained no matter which server the client connects to. The cleansession flag must be set to false if durable subscriptions and/or reliable message delivery is required. Hunt List A set of servers may be specified that are not equal (as in the high availability option). As no state is shared across the servers reliable message delivery and durable subscriptions are not valid. The cleansession flag must be set to true if the hunt list mode is used.		String
camel.component.paho-mqtt5.session-expiry-interval	Sets the Session Expiry Interval. This value, measured in seconds, defines the maximum time that the broker will maintain the session for once the client disconnects. Clients should only connect with a long Session Expiry interval if they intend to connect to the server at some later point in time. By default this value is -1 and so will not be sent, in this case, the session will not expire. If a 0 is sent, the session will end immediately once the Network Connection is closed. When the client has determined that it has no longer any use for the session, it should disconnect with a Session Expiry Interval set to 0.	-1	Long
camel.component.paho-mqtt5.socket-factory	Sets the SocketFactory to use. This allows an application to apply its own policies around the creation of network sockets. If using an SSL connection, an SSLSocketFactory can be used to supply application-specific security settings. The option is a javax.net.SocketFactory type.		SocketFactory
camel.component.paho-mqtt5.ssl-client-props	Sets the SSL properties for the connection. Note that these properties are only valid if an implementation of the Java Secure Socket Extensions (JSSE) is available. These properties are not used if a custom SocketFactory has been set. The following properties can be used: com.ibm.ssl.protocol One of: SSL, SSLv3, TLS, TLSv1, SSL_TLS. com.ibm.ssl.contextProvider Underlying JSSE provider. For example IBMJSSE2 or SunJSSE com.ibm.ssl.keyStore The name of the file that contains the KeyStore object that you want the KeyManager to use. For example /mydir/etc/key.p12 com.ibm.ssl.keyStorePassword The password for the KeyStore object that you want the KeyManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.keyStoreType Type of key store, for example PKCS12, JKS, or JCEKS. com.ibm.ssl.keyStoreProvider Key store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.trustStore The name of the file that contains the KeyStore object that you want the TrustManager to use. com.ibm.ssl.trustStorePassword The password for the TrustStore object that you want the TrustManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.trustStoreType The type of KeyStore object that you want the default TrustManager to use. Same possible values as keyStoreType. com.ibm.ssl.trustStoreProvider Trust store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.enabledCipherSuites A list of which ciphers are enabled. Values are dependent on the provider, for example: SSL_RSA_WITH_AES_128_CBC_SHA;SSL_RSA_WITH_3DES_EDE_CBC_SHA. com.ibm.ssl.keyManager Sets the algorithm that will be used to instantiate a KeyManagerFactory object instead of using the default algorithm available in the platform. Example values: IbmX509 or IBMJ9X509. com.ibm.ssl.trustManager Sets the algorithm that will be used to instantiate a TrustManagerFactory object instead of using the default algorithm available in the platform. Example values: PKIX or IBMJ9X509. The option is a java.util.Properties type.		Properties
camel.component.paho-mqtt5.ssl-hostname-verifier	Sets the HostnameVerifier for the SSL connection. Note that it will be used after handshake on a connection and you should do actions by yourself when hostname is verified error. There is no default HostnameVerifier. The option is a javax.net.ssl.HostnameVerifier type.		HostnameVerifier
camel.component.paho-mqtt5.user-name	Username to be used for authentication against the MQTT broker.		String
camel.component.paho-mqtt5.will-mqtt-properties	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The MQTT properties set for the message. The option is a org.eclipse.paho.mqttv5.common.packet.MqttProperties type.		MqttProperties
camel.component.paho-mqtt5.will-payload	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The byte payload for the message.		String
camel.component.paho-mqtt5.will-qos	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The quality of service to publish the message at (0, 1 or 2).	1	Integer
camel.component.paho-mqtt5.will-retained	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. Whether or not the message should be retained.	false	Boolean
camel.component.paho-mqtt5.will-topic	Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to.		String

Name

Description

Default

Type

camel.component.paho-mqtt5.automatic-reconnect

Sets whether the client will automatically attempt to reconnect to the server if the connection is lost. If set to false, the client will not attempt to automatically reconnect to the server in the event that the connection is lost. If set to true, in the event that the connection is lost, the client will attempt to reconnect to the server. It will initially wait 1 second before it attempts to reconnect, for every failed reconnect attempt, the delay will double until it is at 2 minutes at which point the delay will stay at 2 minutes.

true

Boolean

camel.component.paho-mqtt5.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.paho-mqtt5.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.paho-mqtt5.broker-url

The URL of the MQTT broker.

tcp://localhost:1883

String

camel.component.paho-mqtt5.clean-start

Sets whether the client and server should remember state across restarts and reconnects. If set to false both the client and server will maintain state across restarts of the client, the server and the connection. As state is maintained: Message delivery will be reliable meeting the specified QOS even if the client, server or connection are restarted. The server will treat a subscription as durable. If set to true the client and server will not maintain state across restarts of the client, the server or the connection. This means Message delivery to the specified QOS cannot be maintained if the client, server or connection are restarted The server will treat a subscription as non-durable.

true

Boolean

camel.component.paho-mqtt5.client

To use a shared Paho client. The option is a org.eclipse.paho.mqttv5.client.MqttClient type.

MqttClient

camel.component.paho-mqtt5.client-id

MQTT client identifier. The identifier must be unique.

String

camel.component.paho-mqtt5.configuration

To use the shared Paho configuration. The option is a org.apache.camel.component.paho.mqtt5.PahoMqtt5Configuration type.

PahoMqtt5Configuration

camel.component.paho-mqtt5.connection-timeout

Sets the connection timeout value. This value, measured in seconds, defines the maximum time interval the client will wait for the network connection to the MQTT server to be established. The default timeout is 30 seconds. A value of 0 disables timeout processing meaning the client will wait until the network connection is made successfully or fails.

30

Integer

camel.component.paho-mqtt5.custom-web-socket-headers

Sets the Custom WebSocket Headers for the WebSocket Connection.

Map

camel.component.paho-mqtt5.enabled

Whether to enable auto configuration of the paho-mqtt5 component. This is enabled by default.

Boolean

camel.component.paho-mqtt5.executor-service-timeout

Set the time in seconds that the executor service should wait when terminating before forcefully terminating. It is not recommended to change this value unless you are absolutely sure that you need to.

1

Integer

camel.component.paho-mqtt5.file-persistence-directory

Base directory used by file persistence. Will by default use user directory.

String

camel.component.paho-mqtt5.https-hostname-verification-enabled

Whether SSL HostnameVerifier is enabled or not. The default value is true.

true

Boolean

camel.component.paho-mqtt5.keep-alive-interval

Sets the keep alive interval. This value, measured in seconds, defines the maximum time interval between messages sent or received. It enables the client to detect if the server is no longer available, without having to wait for the TCP/IP timeout. The client will ensure that at least one message travels across the network within each keep alive period. In the absence of a data-related message during the time period, the client sends a very small ping message, which the server will acknowledge. A value of 0 disables keepalive processing in the client. The default value is 60 seconds.

60

Integer

camel.component.paho-mqtt5.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.paho-mqtt5.max-reconnect-delay

Get the maximum time (in millis) to wait between reconnects.

128000

Integer

camel.component.paho-mqtt5.password

Password to be used for authentication against the MQTT broker.

String

camel.component.paho-mqtt5.persistence

Client persistence to be used - memory or file.

PahoMqtt5Persistence

camel.component.paho-mqtt5.qos

Client quality of service level (0-2).

2

Integer

camel.component.paho-mqtt5.receive-maximum

Sets the Receive Maximum. This value represents the limit of QoS 1 and QoS 2 publications that the client is willing to process concurrently. There is no mechanism to limit the number of QoS 0 publications that the Server might try to send. The default value is 65535.

65535

Integer

camel.component.paho-mqtt5.retained

Retain option.

false

Boolean

camel.component.paho-mqtt5.server-u-r-is

Set a list of one or more serverURIs the client may connect to. Multiple servers can be separated by comma. Each serverURI specifies the address of a server that the client may connect to. Two types of connection are supported tcp:// for a TCP connection and ssl:// for a TCP connection secured by SSL/TLS. For example: tcp://localhost:1883 ssl://localhost:8883 If the port is not specified, it will default to 1883 for tcp:// URIs, and 8883 for ssl:// URIs. If serverURIs is set then it overrides the serverURI parameter passed in on the constructor of the MQTT client. When an attempt to connect is initiated the client will start with the first serverURI in the list and work through the list until a connection is established with a server. If a connection cannot be made to any of the servers then the connect attempt fails. Specifying a list of servers that a client may connect to has several uses: High Availability and reliable message delivery Some MQTT servers support a high availability feature where two or more equal MQTT servers share state. An MQTT client can connect to any of the equal servers and be assured that messages are reliably delivered and durable subscriptions are maintained no matter which server the client connects to. The cleansession flag must be set to false if durable subscriptions and/or reliable message delivery is required. Hunt List A set of servers may be specified that are not equal (as in the high availability option). As no state is shared across the servers reliable message delivery and durable subscriptions are not valid. The cleansession flag must be set to true if the hunt list mode is used.

String

camel.component.paho-mqtt5.session-expiry-interval

Sets the Session Expiry Interval. This value, measured in seconds, defines the maximum time that the broker will maintain the session for once the client disconnects. Clients should only connect with a long Session Expiry interval if they intend to connect to the server at some later point in time. By default this value is -1 and so will not be sent, in this case, the session will not expire. If a 0 is sent, the session will end immediately once the Network Connection is closed. When the client has determined that it has no longer any use for the session, it should disconnect with a Session Expiry Interval set to 0.

-1

Long

camel.component.paho-mqtt5.socket-factory

Sets the SocketFactory to use. This allows an application to apply its own policies around the creation of network sockets. If using an SSL connection, an SSLSocketFactory can be used to supply application-specific security settings. The option is a javax.net.SocketFactory type.

SocketFactory

camel.component.paho-mqtt5.ssl-client-props

Sets the SSL properties for the connection. Note that these properties are only valid if an implementation of the Java Secure Socket Extensions (JSSE) is available. These properties are not used if a custom SocketFactory has been set. The following properties can be used: com.ibm.ssl.protocol One of: SSL, SSLv3, TLS, TLSv1, SSL_TLS. com.ibm.ssl.contextProvider Underlying JSSE provider. For example IBMJSSE2 or SunJSSE com.ibm.ssl.keyStore The name of the file that contains the KeyStore object that you want the KeyManager to use. For example /mydir/etc/key.p12 com.ibm.ssl.keyStorePassword The password for the KeyStore object that you want the KeyManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.keyStoreType Type of key store, for example PKCS12, JKS, or JCEKS. com.ibm.ssl.keyStoreProvider Key store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.trustStore The name of the file that contains the KeyStore object that you want the TrustManager to use. com.ibm.ssl.trustStorePassword The password for the TrustStore object that you want the TrustManager to use. The password can either be in plain-text, or may be obfuscated using the static method: com.ibm.micro.security.Password.obfuscate(char password). This obfuscates the password using a simple and insecure XOR and Base64 encoding mechanism. Note that this is only a simple scrambler to obfuscate clear-text passwords. com.ibm.ssl.trustStoreType The type of KeyStore object that you want the default TrustManager to use. Same possible values as keyStoreType. com.ibm.ssl.trustStoreProvider Trust store provider, for example IBMJCE or IBMJCEFIPS. com.ibm.ssl.enabledCipherSuites A list of which ciphers are enabled. Values are dependent on the provider, for example: SSL_RSA_WITH_AES_128_CBC_SHA;SSL_RSA_WITH_3DES_EDE_CBC_SHA. com.ibm.ssl.keyManager Sets the algorithm that will be used to instantiate a KeyManagerFactory object instead of using the default algorithm available in the platform. Example values: IbmX509 or IBMJ9X509. com.ibm.ssl.trustManager Sets the algorithm that will be used to instantiate a TrustManagerFactory object instead of using the default algorithm available in the platform. Example values: PKIX or IBMJ9X509. The option is a java.util.Properties type.

Properties

camel.component.paho-mqtt5.ssl-hostname-verifier

Sets the HostnameVerifier for the SSL connection. Note that it will be used after handshake on a connection and you should do actions by yourself when hostname is verified error. There is no default HostnameVerifier. The option is a javax.net.ssl.HostnameVerifier type.

HostnameVerifier

camel.component.paho-mqtt5.user-name

Username to be used for authentication against the MQTT broker.

String

camel.component.paho-mqtt5.will-mqtt-properties

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The MQTT properties set for the message. The option is a org.eclipse.paho.mqttv5.common.packet.MqttProperties type.

MqttProperties

camel.component.paho-mqtt5.will-payload

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The byte payload for the message.

String

camel.component.paho-mqtt5.will-qos

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The quality of service to publish the message at (0, 1 or 2).

1

Integer

camel.component.paho-mqtt5.will-retained

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. Whether or not the message should be retained.

false

Boolean

camel.component.paho-mqtt5.will-topic

Sets the Last Will and Testament (LWT) for the connection. In the event that this client unexpectedly loses its connection to the server, the server will publish a message to itself using the supplied details. The topic to publish to.

String