Debezium MongoDB Connector

Since Camel 3.0

Only consumer is supported

The Debezium MongoDB component is wrapper around Debezium using Debezium Engine, which enables Change Data Capture from MongoDB database using Debezium without the need for Kafka or Kafka Connect.

The Debezium MongoDB connector uses MongoDB’s oplog to capture the changes. The connector works only with the MongoDB replica sets or with sharded clusters, where each shard is a separate replica set. Therefore, you will need to have your MongoDB instance running either in replica set mode or sharded clusters mode.

Note on handling failures: per Debezium Embedded Engine documentation, the engines are actively recording source offsets and periodically flush these offsets to a persistent storage. Therefore, when the application is restarted or crashed, the engine will resume from the last recorded offset. This means that, at normal operation, your downstream routes will receive each event exactly once. However, in case of an application crash (not having a graceful shutdown), the application will resume from the last recorded offset, which may result in receiving duplicate events immediately after the restart. Therefore, your downstream routes should be tolerant enough of such a case and deduplicate events if needed.

Maven users will need to add the following dependency to their pom.xml for this component.

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-debezium-mongodb</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI format

debezium-mongodb:name[?options]

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

  • the Component DSL.

  • in a configuration file (application.properties, *.yaml files, etc).

  • directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

  • They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.

  • They allow externalizing the configuration from the code.

  • They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The Debezium MongoDB Connector component supports 74 options, which are listed below.

Name Description Default Type

additionalProperties (common)

Additional properties for debezium components in case they can’t be set directly on the camel configurations (e.g: setting Kafka Connect properties needed by Debezium engine, for example setting KafkaOffsetBackingStore), the properties have to be prefixed with additionalProperties.. E.g: additionalProperties.transactional.id=12345&additionalProperties.schema.registry.url=http://localhost:8811/avro.

Map

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

configuration (consumer)

Allow pre-configured Configurations to be set.

MongoDbConnectorEmbeddedDebeziumConfiguration

internalKeyConverter (consumer)

The Converter class that should be used to serialize and deserialize key data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

internalValueConverter (consumer)

The Converter class that should be used to serialize and deserialize value data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

offsetCommitPolicy (consumer)

The name of the Java class of the commit policy. It defines when offsets commit has to be triggered based on the number of events processed and the time elapsed since the last commit. This class must implement the interface 'OffsetCommitPolicy'. The default is a periodic commit policy based upon time intervals.

String

offsetCommitTimeoutMs (consumer)

Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt. The default is 5 seconds.

5000

long

offsetFlushIntervalMs (consumer)

Interval at which to try committing offsets. The default is 1 minute.

60000

long

offsetStorage (consumer)

The name of the Java class that is responsible for persistence of connector offsets.

org.apache.kafka.connect.storage.FileOffsetBackingStore

String

offsetStorageFileName (consumer)

Path to file where offsets are to be stored. Required when offset.storage is set to the FileOffsetBackingStore.

String

offsetStoragePartitions (consumer)

The number of partitions used when creating the offset storage topic. Required when offset.storage is set to the 'KafkaOffsetBackingStore'.

int

offsetStorageReplicationFactor (consumer)

Replication factor used when creating the offset storage topic. Required when offset.storage is set to the KafkaOffsetBackingStore.

int

offsetStorageTopic (consumer)

The name of the Kafka topic where offsets are to be stored. Required when offset.storage is set to the KafkaOffsetBackingStore.

String

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

captureMode (mongodb)

The method used to capture changes from MongoDB server. Options include: 'change_streams' to capture changes via MongoDB Change Streams, update events do not contain full documents; 'change_streams_update_full' (the default) to capture changes via MongoDB Change Streams, update events contain full documents.

change_streams_update_full

String

collectionExcludeList (mongodb)

A comma-separated list of regular expressions or literals that match the collection names for which changes are to be excluded.

String

collectionIncludeList (mongodb)

A comma-separated list of regular expressions or literals that match the collection names for which changes are to be captured.

String

converters (mongodb)

Optional list of custom converters that would be used instead of default ones. The converters are defined using '.type' config option and configured using options '.'.

String

cursorMaxAwaitTimeMs (mongodb)

The maximum processing time in milliseconds to wait for the oplog cursor to process a single poll request.

int

customMetricTags (mongodb)

The custom metric tags will accept key-value pairs to customize the MBean object name which should be appended the end of regular name, each key would represent a tag for the MBean object name, and the corresponding value would be the value of that tag the key is. For example: k1=v1,k2=v2.

String

databaseExcludeList (mongodb)

A comma-separated list of regular expressions or literals that match the database names for which changes are to be excluded.

String

databaseIncludeList (mongodb)

A comma-separated list of regular expressions or literals that match the database names for which changes are to be captured.

String

errorsMaxRetries (mongodb)

The maximum number of retries on connection errors before failing (-1 = no limit, 0 = disabled, 0 = num of retries).

-1

int

eventProcessingFailureHandlingMode (mongodb)

Specify how failures during processing of events (i.e. when encountering a corrupted event) should be handled, including: 'fail' (the default) an exception indicating the problematic event and its position is raised, causing the connector to be stopped; 'warn' the problematic event and its position will be logged and the event will be skipped; 'ignore' the problematic event will be skipped.

fail

String

fieldExcludeList (mongodb)

A comma-separated list of the fully-qualified names of fields that should be excluded from change event message values.

String

fieldRenames (mongodb)

A comma-separated list of the fully-qualified replacements of fields that should be used to rename fields in change event message values. Fully-qualified replacements for fields are of the form databaseName.collectionName.fieldName.nestedFieldName:newNestedFieldName, where databaseName and collectionName may contain the wildcard () which matches any characters, the colon character (:) is used to determine rename mapping of field.

String

heartbeatIntervalMs (mongodb)

Length of an interval in milli-seconds in in which the connector periodically sends heartbeat messages to a heartbeat topic. Use 0 to disable heartbeat messages. Disabled by default.

0ms

int

heartbeatTopicsPrefix (mongodb)

The prefix that is used to name heartbeat topics.Defaults to __debezium-heartbeat.

__debezium-heartbeat

String

incrementalSnapshotWatermarkingStrategy (mongodb)

Specify the strategy used for watermarking during an incremental snapshot: 'insert_insert' both open and close signal is written into signal data collection (default); 'insert_delete' only open signal is written on signal data collection, the close will delete the relative open signal;.

INSERT_INSERT

String

maxBatchSize (mongodb)

Maximum size of each batch of source records. Defaults to 2048.

2048

int

maxQueueSize (mongodb)

Maximum size of the queue for change events read from the database log but not yet recorded or forwarded. Defaults to 8192, and should always be larger than the maximum batch size.

8192

int

maxQueueSizeInBytes (mongodb)

Maximum size of the queue in bytes for change events read from the database log but not yet recorded or forwarded. Defaults to 0. Mean the feature is not enabled.

0

long

mongodbAuthsource (mongodb)

Database containing user credentials.

admin

String

mongodbConnectionString (mongodb)

Database connection string.

String

mongodbConnectTimeoutMs (mongodb)

The connection timeout, given in milliseconds. Defaults to 10 seconds (10,000 ms).

10s

int

mongodbHeartbeatFrequencyMs (mongodb)

The frequency that the cluster monitor attempts to reach each server. Defaults to 10 seconds (10,000 ms).

10s

int

mongodbPassword (mongodb)

Required Password to be used when connecting to MongoDB, if necessary.

String

mongodbPollIntervalMs (mongodb)

Interval for looking for new, removed, or changed replica sets, given in milliseconds. Defaults to 30 seconds (30,000 ms).

30s

long

mongodbServerSelectionTimeoutMs (mongodb)

The server selection timeout, given in milliseconds. Defaults to 10 seconds (10,000 ms).

30s

int

mongodbSocketTimeoutMs (mongodb)

The socket timeout, given in milliseconds. Defaults to 0 ms.

0ms

int

mongodbSslEnabled (mongodb)

Should connector use SSL to connect to MongoDB instances.

false

boolean

mongodbSslInvalidHostnameAllowed (mongodb)

Whether invalid host names are allowed when using SSL. If true the connection will not prevent man-in-the-middle attacks.

false

boolean

mongodbUser (mongodb)

Database user for connecting to MongoDB, if necessary.

String

notificationEnabledChannels (mongodb)

List of notification channels names that are enabled.

String

notificationSinkTopicName (mongodb)

The name of the topic for the notifications. This is required in case 'sink' is in the list of enabled channels.

String

pollIntervalMs (mongodb)

Time to wait for new change events to appear after receiving no events, given in milliseconds. Defaults to 500 ms.

500ms

long

postProcessors (mongodb)

Optional list of post processors. The processors are defined using '.type' config option and configured using options ''.

String

provideTransactionMetadata (mongodb)

Enables transaction metadata extraction together with event counting.

false

boolean

queryFetchSize (mongodb)

The maximum number of records that should be loaded into memory while streaming. A value of '0' uses the default JDBC fetch size.

0

int

retriableRestartConnectorWaitMs (mongodb)

Time to wait before restarting connector after retriable exception occurs. Defaults to 10000ms.

10s

long

schemaHistoryInternalFileFilename (mongodb)

The path to the file that will be used to record the database schema history.

String

schemaNameAdjustmentMode (mongodb)

Specify how schema names should be adjusted for compatibility with the message converter used by the connector, including: 'avro' replaces the characters that cannot be used in the Avro type name with underscore; 'avro_unicode' replaces the underscore or characters that cannot be used in the Avro type name with corresponding unicode like _uxxxx. Note: _ is an escape sequence like backslash in Java;'none' does not apply any adjustment (default).

none

String

signalDataCollection (mongodb)

The name of the data collection that is used to send signals/commands to Debezium. Signaling is disabled when not set.

String

signalEnabledChannels (mongodb)

List of channels names that are enabled. Source channel is enabled by default.

source

String

signalPollIntervalMs (mongodb)

Interval for looking for new signals in registered channels, given in milliseconds. Defaults to 5 seconds.

5s

long

skippedOperations (mongodb)

The comma-separated list of operations to skip during streaming, defined as: 'c' for inserts/create; 'u' for updates; 'd' for deletes, 't' for truncates, and 'none' to indicate nothing skipped. By default, only truncate operations will be skipped.

t

String

snapshotCollectionFilterOverrides (mongodb)

This property contains a comma-separated list of ., for which the initial snapshot may be a subset of data present in the data source. The subset would be defined by mongodb filter query specified as value for property snapshot.collection.filter.override..

String

snapshotDelayMs (mongodb)

A delay period before a snapshot will begin, given in milliseconds. Defaults to 0 ms.

0ms

long

snapshotFetchSize (mongodb)

The maximum number of records that should be loaded into memory while performing a snapshot.

int

snapshotIncludeCollectionList (mongodb)

This setting must be set to specify a list of tables/collections whose snapshot must be taken on creating or restarting the connector.

String

snapshotMaxThreads (mongodb)

The maximum number of threads used to perform the snapshot. Defaults to 1.

1

int

snapshotMode (mongodb)

The criteria for running a snapshot upon startup of the connector. Select one of the following snapshot options: 'initial' (default): If the connector does not detect any offsets for the logical server name, it runs a snapshot that captures the current full state of the configured tables. After the snapshot completes, the connector begins to stream changes from the oplog. 'never': The connector does not run a snapshot. Upon first startup, the connector immediately begins reading from the beginning of the oplog.

initial

String

snapshotModeConfigurationBasedSnapshotData (mongodb)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the data should be snapshotted or not.

false

boolean

snapshotModeConfigurationBasedSnapshotOnDataError (mongodb)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the data should be snapshotted or not in case of error.

false

boolean

snapshotModeConfigurationBasedSnapshotOnSchemaError (mongodb)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the schema should be snapshotted or not in case of error.

false

boolean

snapshotModeConfigurationBasedSnapshotSchema (mongodb)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the schema should be snapshotted or not.

false

boolean

snapshotModeConfigurationBasedStartStream (mongodb)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the stream should start or not after snapshot.

false

boolean

snapshotModeCustomName (mongodb)

When 'snapshot.mode' is set as custom, this setting must be set to specify a the name of the custom implementation provided in the 'name()' method. The implementations must implement the 'Snapshotter' interface and is called on each app boot to determine whether to do a snapshot.

String

sourceinfoStructMaker (mongodb)

The name of the SourceInfoStructMaker class that returns SourceInfo schema and struct.

io.debezium.connector.mongodb.MongoDbSourceInfoStructMaker

String

streamingDelayMs (mongodb)

A delay period after the snapshot is completed and the streaming begins, given in milliseconds. Defaults to 0 ms.

0ms

long

tombstonesOnDelete (mongodb)

Whether delete operations should be represented by a delete event and a subsequent tombstone event (true) or only by a delete event (false). Emitting the tombstone event (the default behavior) allows Kafka to completely delete all events pertaining to the given key once the source record got deleted.

false

boolean

topicNamingStrategy (mongodb)

The name of the TopicNamingStrategy class that should be used to determine the topic name for data change, schema change, transaction, heartbeat event etc.

io.debezium.schema.SchemaTopicNamingStrategy

String

topicPrefix (mongodb)

Required Topic prefix that identifies and provides a namespace for the particular database server/cluster is capturing changes. The topic prefix should be unique across all other connectors, since it is used as a prefix for all Kafka topic names that receive events emitted by this connector. Only alphanumeric characters, hyphens, dots and underscores must be accepted.

String

transactionMetadataFactory (mongodb)

Class to make transaction context & transaction struct/schemas.

io.debezium.pipeline.txmetadata.DefaultTransactionMetadataFactory

String

Endpoint Options

The Debezium MongoDB Connector endpoint is configured using URI syntax:

debezium-mongodb:name

With the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

name (consumer)

Required Unique name for the connector. Attempting to register again with the same name will fail.

String

Query Parameters (74 parameters)

Name Description Default Type

additionalProperties (common)

Additional properties for debezium components in case they can’t be set directly on the camel configurations (e.g: setting Kafka Connect properties needed by Debezium engine, for example setting KafkaOffsetBackingStore), the properties have to be prefixed with additionalProperties.. E.g: additionalProperties.transactional.id=12345&additionalProperties.schema.registry.url=http://localhost:8811/avro.

Map

internalKeyConverter (consumer)

The Converter class that should be used to serialize and deserialize key data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

internalValueConverter (consumer)

The Converter class that should be used to serialize and deserialize value data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

offsetCommitPolicy (consumer)

The name of the Java class of the commit policy. It defines when offsets commit has to be triggered based on the number of events processed and the time elapsed since the last commit. This class must implement the interface 'OffsetCommitPolicy'. The default is a periodic commit policy based upon time intervals.

String

offsetCommitTimeoutMs (consumer)

Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt. The default is 5 seconds.

5000

long

offsetFlushIntervalMs (consumer)

Interval at which to try committing offsets. The default is 1 minute.

60000

long

offsetStorage (consumer)

The name of the Java class that is responsible for persistence of connector offsets.

org.apache.kafka.connect.storage.FileOffsetBackingStore

String

offsetStorageFileName (consumer)

Path to file where offsets are to be stored. Required when offset.storage is set to the FileOffsetBackingStore.

String

offsetStoragePartitions (consumer)

The number of partitions used when creating the offset storage topic. Required when offset.storage is set to the 'KafkaOffsetBackingStore'.

int

offsetStorageReplicationFactor (consumer)

Replication factor used when creating the offset storage topic. Required when offset.storage is set to the KafkaOffsetBackingStore.

int

offsetStorageTopic (consumer)

The name of the Kafka topic where offsets are to be stored. Required when offset.storage is set to the KafkaOffsetBackingStore.

String

bridgeErrorHandler (consumer (advanced))

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

  • InOnly

  • InOut

ExchangePattern

captureMode (mongodb)

The method used to capture changes from MongoDB server. Options include: 'change_streams' to capture changes via MongoDB Change Streams, update events do not contain full documents; 'change_streams_update_full' (the default) to capture changes via MongoDB Change Streams, update events contain full documents.

change_streams_update_full

String

collectionExcludeList (mongodb)

A comma-separated list of regular expressions or literals that match the collection names for which changes are to be excluded.

String

collectionIncludeList (mongodb)

A comma-separated list of regular expressions or literals that match the collection names for which changes are to be captured.

String

converters (mongodb)

Optional list of custom converters that would be used instead of default ones. The converters are defined using '.type' config option and configured using options '.'.

String

cursorMaxAwaitTimeMs (mongodb)

The maximum processing time in milliseconds to wait for the oplog cursor to process a single poll request.

int

customMetricTags (mongodb)

The custom metric tags will accept key-value pairs to customize the MBean object name which should be appended the end of regular name, each key would represent a tag for the MBean object name, and the corresponding value would be the value of that tag the key is. For example: k1=v1,k2=v2.

String

databaseExcludeList (mongodb)

A comma-separated list of regular expressions or literals that match the database names for which changes are to be excluded.

String

databaseIncludeList (mongodb)

A comma-separated list of regular expressions or literals that match the database names for which changes are to be captured.

String

errorsMaxRetries (mongodb)

The maximum number of retries on connection errors before failing (-1 = no limit, 0 = disabled, 0 = num of retries).

-1

int

eventProcessingFailureHandlingMode (mongodb)

Specify how failures during processing of events (i.e. when encountering a corrupted event) should be handled, including: 'fail' (the default) an exception indicating the problematic event and its position is raised, causing the connector to be stopped; 'warn' the problematic event and its position will be logged and the event will be skipped; 'ignore' the problematic event will be skipped.

fail

String

fieldExcludeList (mongodb)

A comma-separated list of the fully-qualified names of fields that should be excluded from change event message values.

String

fieldRenames (mongodb)

A comma-separated list of the fully-qualified replacements of fields that should be used to rename fields in change event message values. Fully-qualified replacements for fields are of the form databaseName.collectionName.fieldName.nestedFieldName:newNestedFieldName, where databaseName and collectionName may contain the wildcard () which matches any characters, the colon character (:) is used to determine rename mapping of field.

String

heartbeatIntervalMs (mongodb)

Length of an interval in milli-seconds in in which the connector periodically sends heartbeat messages to a heartbeat topic. Use 0 to disable heartbeat messages. Disabled by default.

0ms

int

heartbeatTopicsPrefix (mongodb)

The prefix that is used to name heartbeat topics.Defaults to __debezium-heartbeat.

__debezium-heartbeat

String

incrementalSnapshotWatermarkingStrategy (mongodb)

Specify the strategy used for watermarking during an incremental snapshot: 'insert_insert' both open and close signal is written into signal data collection (default); 'insert_delete' only open signal is written on signal data collection, the close will delete the relative open signal;.

INSERT_INSERT

String

maxBatchSize (mongodb)

Maximum size of each batch of source records. Defaults to 2048.

2048

int

maxQueueSize (mongodb)

Maximum size of the queue for change events read from the database log but not yet recorded or forwarded. Defaults to 8192, and should always be larger than the maximum batch size.

8192

int

maxQueueSizeInBytes (mongodb)

Maximum size of the queue in bytes for change events read from the database log but not yet recorded or forwarded. Defaults to 0. Mean the feature is not enabled.

0

long

mongodbAuthsource (mongodb)

Database containing user credentials.

admin

String

mongodbConnectionString (mongodb)

Database connection string.

String

mongodbConnectTimeoutMs (mongodb)

The connection timeout, given in milliseconds. Defaults to 10 seconds (10,000 ms).

10s

int

mongodbHeartbeatFrequencyMs (mongodb)

The frequency that the cluster monitor attempts to reach each server. Defaults to 10 seconds (10,000 ms).

10s

int

mongodbPassword (mongodb)

Required Password to be used when connecting to MongoDB, if necessary.

String

mongodbPollIntervalMs (mongodb)

Interval for looking for new, removed, or changed replica sets, given in milliseconds. Defaults to 30 seconds (30,000 ms).

30s

long

mongodbServerSelectionTimeoutMs (mongodb)

The server selection timeout, given in milliseconds. Defaults to 10 seconds (10,000 ms).

30s

int

mongodbSocketTimeoutMs (mongodb)

The socket timeout, given in milliseconds. Defaults to 0 ms.

0ms

int

mongodbSslEnabled (mongodb)

Should connector use SSL to connect to MongoDB instances.

false

boolean

mongodbSslInvalidHostnameAllowed (mongodb)

Whether invalid host names are allowed when using SSL. If true the connection will not prevent man-in-the-middle attacks.

false

boolean

mongodbUser (mongodb)

Database user for connecting to MongoDB, if necessary.

String

notificationEnabledChannels (mongodb)

List of notification channels names that are enabled.

String

notificationSinkTopicName (mongodb)

The name of the topic for the notifications. This is required in case 'sink' is in the list of enabled channels.

String

pollIntervalMs (mongodb)

Time to wait for new change events to appear after receiving no events, given in milliseconds. Defaults to 500 ms.

500ms

long

postProcessors (mongodb)

Optional list of post processors. The processors are defined using '.type' config option and configured using options ''.

String

provideTransactionMetadata (mongodb)

Enables transaction metadata extraction together with event counting.

false

boolean

queryFetchSize (mongodb)

The maximum number of records that should be loaded into memory while streaming. A value of '0' uses the default JDBC fetch size.

0

int

retriableRestartConnectorWaitMs (mongodb)

Time to wait before restarting connector after retriable exception occurs. Defaults to 10000ms.

10s

long

schemaHistoryInternalFileFilename (mongodb)

The path to the file that will be used to record the database schema history.

String

schemaNameAdjustmentMode (mongodb)

Specify how schema names should be adjusted for compatibility with the message converter used by the connector, including: 'avro' replaces the characters that cannot be used in the Avro type name with underscore; 'avro_unicode' replaces the underscore or characters that cannot be used in the Avro type name with corresponding unicode like _uxxxx. Note: _ is an escape sequence like backslash in Java;'none' does not apply any adjustment (default).

none

String

signalDataCollection (mongodb)

The name of the data collection that is used to send signals/commands to Debezium. Signaling is disabled when not set.

String

signalEnabledChannels (mongodb)

List of channels names that are enabled. Source channel is enabled by default.

source

String

signalPollIntervalMs (mongodb)

Interval for looking for new signals in registered channels, given in milliseconds. Defaults to 5 seconds.

5s

long

skippedOperations (mongodb)

The comma-separated list of operations to skip during streaming, defined as: 'c' for inserts/create; 'u' for updates; 'd' for deletes, 't' for truncates, and 'none' to indicate nothing skipped. By default, only truncate operations will be skipped.

t

String

snapshotCollectionFilterOverrides (mongodb)

This property contains a comma-separated list of ., for which the initial snapshot may be a subset of data present in the data source. The subset would be defined by mongodb filter query specified as value for property snapshot.collection.filter.override..

String

snapshotDelayMs (mongodb)

A delay period before a snapshot will begin, given in milliseconds. Defaults to 0 ms.

0ms

long

snapshotFetchSize (mongodb)

The maximum number of records that should be loaded into memory while performing a snapshot.

int

snapshotIncludeCollectionList (mongodb)

This setting must be set to specify a list of tables/collections whose snapshot must be taken on creating or restarting the connector.

String

snapshotMaxThreads (mongodb)

The maximum number of threads used to perform the snapshot. Defaults to 1.

1

int

snapshotMode (mongodb)

The criteria for running a snapshot upon startup of the connector. Select one of the following snapshot options: 'initial' (default): If the connector does not detect any offsets for the logical server name, it runs a snapshot that captures the current full state of the configured tables. After the snapshot completes, the connector begins to stream changes from the oplog. 'never': The connector does not run a snapshot. Upon first startup, the connector immediately begins reading from the beginning of the oplog.

initial

String

snapshotModeConfigurationBasedSnapshotData (mongodb)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the data should be snapshotted or not.

false

boolean

snapshotModeConfigurationBasedSnapshotOnDataError (mongodb)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the data should be snapshotted or not in case of error.

false

boolean

snapshotModeConfigurationBasedSnapshotOnSchemaError (mongodb)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the schema should be snapshotted or not in case of error.

false

boolean

snapshotModeConfigurationBasedSnapshotSchema (mongodb)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the schema should be snapshotted or not.

false

boolean

snapshotModeConfigurationBasedStartStream (mongodb)

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the stream should start or not after snapshot.

false

boolean

snapshotModeCustomName (mongodb)

When 'snapshot.mode' is set as custom, this setting must be set to specify a the name of the custom implementation provided in the 'name()' method. The implementations must implement the 'Snapshotter' interface and is called on each app boot to determine whether to do a snapshot.

String

sourceinfoStructMaker (mongodb)

The name of the SourceInfoStructMaker class that returns SourceInfo schema and struct.

io.debezium.connector.mongodb.MongoDbSourceInfoStructMaker

String

streamingDelayMs (mongodb)

A delay period after the snapshot is completed and the streaming begins, given in milliseconds. Defaults to 0 ms.

0ms

long

tombstonesOnDelete (mongodb)

Whether delete operations should be represented by a delete event and a subsequent tombstone event (true) or only by a delete event (false). Emitting the tombstone event (the default behavior) allows Kafka to completely delete all events pertaining to the given key once the source record got deleted.

false

boolean

topicNamingStrategy (mongodb)

The name of the TopicNamingStrategy class that should be used to determine the topic name for data change, schema change, transaction, heartbeat event etc.

io.debezium.schema.SchemaTopicNamingStrategy

String

topicPrefix (mongodb)

Required Topic prefix that identifies and provides a namespace for the particular database server/cluster is capturing changes. The topic prefix should be unique across all other connectors, since it is used as a prefix for all Kafka topic names that receive events emitted by this connector. Only alphanumeric characters, hyphens, dots and underscores must be accepted.

String

transactionMetadataFactory (mongodb)

Class to make transaction context & transaction struct/schemas.

io.debezium.pipeline.txmetadata.DefaultTransactionMetadataFactory

String

For more information about configuration: https://debezium.io/documentation/reference/0.10/operations/embedded.html#engine-properties https://debezium.io/documentation/reference/0.10/connectors/mongodb.html#connector-properties

Message Headers

The Debezium MongoDB Connector component supports 7 message header(s), which is/are listed below:

Name Description Default Type

CamelDebeziumSourceMetadata (consumer)

Constant: HEADER_SOURCE_METADATA

The metadata about the source event, for example table name, database name, log position, etc, please refer to the Debezium documentation for more info.

Map

CamelDebeziumIdentifier (consumer)

Constant: HEADER_IDENTIFIER

The identifier of the connector, normally is this format {server-name}.{database-name}.{table-name}.

String

CamelDebeziumKey (consumer)

Constant: HEADER_KEY

The key of the event, normally is the table Primary Key.

Struct

CamelDebeziumOperation (consumer)

Constant: HEADER_OPERATION

If presents, the type of event operation. Values for the connector are c for create (or insert), u for update, d for delete or r for read (in the case of a initial sync) or in case of a snapshot event.

String

CamelDebeziumTimestamp (consumer)

Constant: HEADER_TIMESTAMP

If presents, the time (using the system clock in the JVM) at which the connector processed the event.

Long

CamelDebeziumBefore (consumer)

Constant: HEADER_BEFORE

If presents, contains the state of the row before the event occurred.

Struct

CamelDebeziumDdlSQL (consumer)

Constant: HEADER_DDL_SQL

If presents, the ddl sql text of the event.

String

Note: Debezium Mongodb uses MongoDB’s oplog to populate the CDC events, the update events in MongoDB’s oplog don’t have the before or after states of the changed document, so there’s no way for the Debezium connector to provide this information, therefore header key CamelDebeziumBefore is not available in this component.

Message body

The message body if is not null (in case of tombstones), it contains the state of the row after the event occurred as String JSON format, and you can unmarshal using Camel JSON Data Format.

Examples

Consuming events

Here is a basic route that you can use to listen to Debezium events from MongoDB connector:

from("debezium-mongodb:dbz-test-1?offsetStorageFileName=/usr/offset-file-1.dat&mongodbHosts=rs0/localhost:27017&mongodbUser=debezium&mongodbPassword=dbz&mongodbName=dbserver1&databaseHistoryFileFilename=/usr/history-file-1.dat")
    .log("Event received from Debezium : ${body}")
    .log("    with this identifier ${headers.CamelDebeziumIdentifier}")
    .log("    with these source metadata ${headers.CamelDebeziumSourceMetadata}")
    .log("    the event occurred upon this operation '${headers.CamelDebeziumSourceOperation}'")
    .log("    on this database '${headers.CamelDebeziumSourceMetadata[db]}' and this table '${headers.CamelDebeziumSourceMetadata[table]}'")
    .log("    with the key ${headers.CamelDebeziumKey}")
    .choice()
        .when(header(DebeziumConstants.HEADER_OPERATION).in("c", "u", "r"))
            .unmarshal().json()
            .log("Event received from Debezium : ${body}")
         .end()
    .end();

By default, the component will emit the events in the body String JSON format in case of u, c or r operations. This can be easily converted to JSON using Camel JSON Data Format e.g.: .unmarshal().json() like the above example. In case of operation d, the body will be null.

This component is a thin wrapper around Debezium Engine as mentioned. Therefore, before using this component in production, you need to understand how Debezium works and how configurations can reflect the expected behavior. This is especially true in regard to handling failures.

Spring Boot Auto-Configuration

When using debezium-mongodb with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-debezium-mongodb-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 75 options, which are listed below.

Name Description Default Type

camel.component.debezium-mongodb.additional-properties

Additional properties for debezium components in case they can’t be set directly on the camel configurations (e.g: setting Kafka Connect properties needed by Debezium engine, for example setting KafkaOffsetBackingStore), the properties have to be prefixed with additionalProperties.. E.g: additionalProperties.transactional.id=12345&additionalProperties.schema.registry.url=http://localhost:8811/avro.

Map

camel.component.debezium-mongodb.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.debezium-mongodb.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.debezium-mongodb.capture-mode

The method used to capture changes from MongoDB server. Options include: 'change_streams' to capture changes via MongoDB Change Streams, update events do not contain full documents; 'change_streams_update_full' (the default) to capture changes via MongoDB Change Streams, update events contain full documents.

change_streams_update_full

String

camel.component.debezium-mongodb.collection-exclude-list

A comma-separated list of regular expressions or literals that match the collection names for which changes are to be excluded.

String

camel.component.debezium-mongodb.collection-include-list

A comma-separated list of regular expressions or literals that match the collection names for which changes are to be captured.

String

camel.component.debezium-mongodb.configuration

Allow pre-configured Configurations to be set. The option is a org.apache.camel.component.debezium.configuration.MongoDbConnectorEmbeddedDebeziumConfiguration type.

MongoDbConnectorEmbeddedDebeziumConfiguration

camel.component.debezium-mongodb.converters

Optional list of custom converters that would be used instead of default ones. The converters are defined using '.type' config option and configured using options '.'.

String

camel.component.debezium-mongodb.cursor-max-await-time-ms

The maximum processing time in milliseconds to wait for the oplog cursor to process a single poll request. The option is a int type.

Integer

camel.component.debezium-mongodb.custom-metric-tags

The custom metric tags will accept key-value pairs to customize the MBean object name which should be appended the end of regular name, each key would represent a tag for the MBean object name, and the corresponding value would be the value of that tag the key is. For example: k1=v1,k2=v2.

String

camel.component.debezium-mongodb.database-exclude-list

A comma-separated list of regular expressions or literals that match the database names for which changes are to be excluded.

String

camel.component.debezium-mongodb.database-include-list

A comma-separated list of regular expressions or literals that match the database names for which changes are to be captured.

String

camel.component.debezium-mongodb.enabled

Whether to enable auto configuration of the debezium-mongodb component. This is enabled by default.

Boolean

camel.component.debezium-mongodb.errors-max-retries

The maximum number of retries on connection errors before failing (-1 = no limit, 0 = disabled, 0 = num of retries).

-1

Integer

camel.component.debezium-mongodb.event-processing-failure-handling-mode

Specify how failures during processing of events (i.e. when encountering a corrupted event) should be handled, including: 'fail' (the default) an exception indicating the problematic event and its position is raised, causing the connector to be stopped; 'warn' the problematic event and its position will be logged and the event will be skipped; 'ignore' the problematic event will be skipped.

fail

String

camel.component.debezium-mongodb.field-exclude-list

A comma-separated list of the fully-qualified names of fields that should be excluded from change event message values.

String

camel.component.debezium-mongodb.field-renames

A comma-separated list of the fully-qualified replacements of fields that should be used to rename fields in change event message values. Fully-qualified replacements for fields are of the form databaseName.collectionName.fieldName.nestedFieldName:newNestedFieldName, where databaseName and collectionName may contain the wildcard () which matches any characters, the colon character (:) is used to determine rename mapping of field.

String

camel.component.debezium-mongodb.heartbeat-interval-ms

Length of an interval in milli-seconds in in which the connector periodically sends heartbeat messages to a heartbeat topic. Use 0 to disable heartbeat messages. Disabled by default. The option is a int type.

0

Integer

camel.component.debezium-mongodb.heartbeat-topics-prefix

The prefix that is used to name heartbeat topics.Defaults to __debezium-heartbeat.

__debezium-heartbeat

String

camel.component.debezium-mongodb.incremental-snapshot-watermarking-strategy

Specify the strategy used for watermarking during an incremental snapshot: 'insert_insert' both open and close signal is written into signal data collection (default); 'insert_delete' only open signal is written on signal data collection, the close will delete the relative open signal;.

INSERT_INSERT

String

camel.component.debezium-mongodb.internal-key-converter

The Converter class that should be used to serialize and deserialize key data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

camel.component.debezium-mongodb.internal-value-converter

The Converter class that should be used to serialize and deserialize value data for offsets. The default is JSON converter.

org.apache.kafka.connect.json.JsonConverter

String

camel.component.debezium-mongodb.max-batch-size

Maximum size of each batch of source records. Defaults to 2048.

2048

Integer

camel.component.debezium-mongodb.max-queue-size

Maximum size of the queue for change events read from the database log but not yet recorded or forwarded. Defaults to 8192, and should always be larger than the maximum batch size.

8192

Integer

camel.component.debezium-mongodb.max-queue-size-in-bytes

Maximum size of the queue in bytes for change events read from the database log but not yet recorded or forwarded. Defaults to 0. Mean the feature is not enabled.

0

Long

camel.component.debezium-mongodb.mongodb-authsource

Database containing user credentials.

admin

String

camel.component.debezium-mongodb.mongodb-connect-timeout-ms

The connection timeout, given in milliseconds. Defaults to 10 seconds (10,000 ms). The option is a int type.

10000

Integer

camel.component.debezium-mongodb.mongodb-connection-string

Database connection string.

String

camel.component.debezium-mongodb.mongodb-heartbeat-frequency-ms

The frequency that the cluster monitor attempts to reach each server. Defaults to 10 seconds (10,000 ms). The option is a int type.

10000

Integer

camel.component.debezium-mongodb.mongodb-password

Password to be used when connecting to MongoDB, if necessary.

String

camel.component.debezium-mongodb.mongodb-poll-interval-ms

Interval for looking for new, removed, or changed replica sets, given in milliseconds. Defaults to 30 seconds (30,000 ms). The option is a long type.

30000

Long

camel.component.debezium-mongodb.mongodb-server-selection-timeout-ms

The server selection timeout, given in milliseconds. Defaults to 10 seconds (10,000 ms). The option is a int type.

30000

Integer

camel.component.debezium-mongodb.mongodb-socket-timeout-ms

The socket timeout, given in milliseconds. Defaults to 0 ms. The option is a int type.

0

Integer

camel.component.debezium-mongodb.mongodb-ssl-enabled

Should connector use SSL to connect to MongoDB instances.

false

Boolean

camel.component.debezium-mongodb.mongodb-ssl-invalid-hostname-allowed

Whether invalid host names are allowed when using SSL. If true the connection will not prevent man-in-the-middle attacks.

false

Boolean

camel.component.debezium-mongodb.mongodb-user

Database user for connecting to MongoDB, if necessary.

String

camel.component.debezium-mongodb.notification-enabled-channels

List of notification channels names that are enabled.

String

camel.component.debezium-mongodb.notification-sink-topic-name

The name of the topic for the notifications. This is required in case 'sink' is in the list of enabled channels.

String

camel.component.debezium-mongodb.offset-commit-policy

The name of the Java class of the commit policy. It defines when offsets commit has to be triggered based on the number of events processed and the time elapsed since the last commit. This class must implement the interface 'OffsetCommitPolicy'. The default is a periodic commit policy based upon time intervals.

String

camel.component.debezium-mongodb.offset-commit-timeout-ms

Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt. The default is 5 seconds. The option is a long type.

5000

Long

camel.component.debezium-mongodb.offset-flush-interval-ms

Interval at which to try committing offsets. The default is 1 minute. The option is a long type.

60000

Long

camel.component.debezium-mongodb.offset-storage

The name of the Java class that is responsible for persistence of connector offsets.

org.apache.kafka.connect.storage.FileOffsetBackingStore

String

camel.component.debezium-mongodb.offset-storage-file-name

Path to file where offsets are to be stored. Required when offset.storage is set to the FileOffsetBackingStore.

String

camel.component.debezium-mongodb.offset-storage-partitions

The number of partitions used when creating the offset storage topic. Required when offset.storage is set to the 'KafkaOffsetBackingStore'.

Integer

camel.component.debezium-mongodb.offset-storage-replication-factor

Replication factor used when creating the offset storage topic. Required when offset.storage is set to the KafkaOffsetBackingStore.

Integer

camel.component.debezium-mongodb.offset-storage-topic

The name of the Kafka topic where offsets are to be stored. Required when offset.storage is set to the KafkaOffsetBackingStore.

String

camel.component.debezium-mongodb.poll-interval-ms

Time to wait for new change events to appear after receiving no events, given in milliseconds. Defaults to 500 ms. The option is a long type.

500

Long

camel.component.debezium-mongodb.post-processors

Optional list of post processors. The processors are defined using '.type' config option and configured using options ''.

String

camel.component.debezium-mongodb.provide-transaction-metadata

Enables transaction metadata extraction together with event counting.

false

Boolean

camel.component.debezium-mongodb.query-fetch-size

The maximum number of records that should be loaded into memory while streaming. A value of '0' uses the default JDBC fetch size.

0

Integer

camel.component.debezium-mongodb.retriable-restart-connector-wait-ms

Time to wait before restarting connector after retriable exception occurs. Defaults to 10000ms. The option is a long type.

10000

Long

camel.component.debezium-mongodb.schema-history-internal-file-filename

The path to the file that will be used to record the database schema history.

String

camel.component.debezium-mongodb.schema-name-adjustment-mode

Specify how schema names should be adjusted for compatibility with the message converter used by the connector, including: 'avro' replaces the characters that cannot be used in the Avro type name with underscore; 'avro_unicode' replaces the underscore or characters that cannot be used in the Avro type name with corresponding unicode like _uxxxx. Note: _ is an escape sequence like backslash in Java;'none' does not apply any adjustment (default).

none

String

camel.component.debezium-mongodb.signal-data-collection

The name of the data collection that is used to send signals/commands to Debezium. Signaling is disabled when not set.

String

camel.component.debezium-mongodb.signal-enabled-channels

List of channels names that are enabled. Source channel is enabled by default.

source

String

camel.component.debezium-mongodb.signal-poll-interval-ms

Interval for looking for new signals in registered channels, given in milliseconds. Defaults to 5 seconds. The option is a long type.

5000

Long

camel.component.debezium-mongodb.skipped-operations

The comma-separated list of operations to skip during streaming, defined as: 'c' for inserts/create; 'u' for updates; 'd' for deletes, 't' for truncates, and 'none' to indicate nothing skipped. By default, only truncate operations will be skipped.

t

String

camel.component.debezium-mongodb.snapshot-collection-filter-overrides

This property contains a comma-separated list of ., for which the initial snapshot may be a subset of data present in the data source. The subset would be defined by mongodb filter query specified as value for property snapshot.collection.filter.override..

String

camel.component.debezium-mongodb.snapshot-delay-ms

A delay period before a snapshot will begin, given in milliseconds. Defaults to 0 ms. The option is a long type.

0

Long

camel.component.debezium-mongodb.snapshot-fetch-size

The maximum number of records that should be loaded into memory while performing a snapshot.

Integer

camel.component.debezium-mongodb.snapshot-include-collection-list

This setting must be set to specify a list of tables/collections whose snapshot must be taken on creating or restarting the connector.

String

camel.component.debezium-mongodb.snapshot-max-threads

The maximum number of threads used to perform the snapshot. Defaults to 1.

1

Integer

camel.component.debezium-mongodb.snapshot-mode

The criteria for running a snapshot upon startup of the connector. Select one of the following snapshot options: 'initial' (default): If the connector does not detect any offsets for the logical server name, it runs a snapshot that captures the current full state of the configured tables. After the snapshot completes, the connector begins to stream changes from the oplog. 'never': The connector does not run a snapshot. Upon first startup, the connector immediately begins reading from the beginning of the oplog.

initial

String

camel.component.debezium-mongodb.snapshot-mode-configuration-based-snapshot-data

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the data should be snapshotted or not.

false

Boolean

camel.component.debezium-mongodb.snapshot-mode-configuration-based-snapshot-on-data-error

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the data should be snapshotted or not in case of error.

false

Boolean

camel.component.debezium-mongodb.snapshot-mode-configuration-based-snapshot-on-schema-error

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the schema should be snapshotted or not in case of error.

false

Boolean

camel.component.debezium-mongodb.snapshot-mode-configuration-based-snapshot-schema

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the schema should be snapshotted or not.

false

Boolean

camel.component.debezium-mongodb.snapshot-mode-configuration-based-start-stream

When 'snapshot.mode' is set as configuration_based, this setting permits to specify whenever the stream should start or not after snapshot.

false

Boolean

camel.component.debezium-mongodb.snapshot-mode-custom-name

When 'snapshot.mode' is set as custom, this setting must be set to specify a the name of the custom implementation provided in the 'name()' method. The implementations must implement the 'Snapshotter' interface and is called on each app boot to determine whether to do a snapshot.

String

camel.component.debezium-mongodb.sourceinfo-struct-maker

The name of the SourceInfoStructMaker class that returns SourceInfo schema and struct.

io.debezium.connector.mongodb.MongoDbSourceInfoStructMaker

String

camel.component.debezium-mongodb.streaming-delay-ms

A delay period after the snapshot is completed and the streaming begins, given in milliseconds. Defaults to 0 ms. The option is a long type.

0

Long

camel.component.debezium-mongodb.tombstones-on-delete

Whether delete operations should be represented by a delete event and a subsequent tombstone event (true) or only by a delete event (false). Emitting the tombstone event (the default behavior) allows Kafka to completely delete all events pertaining to the given key once the source record got deleted.

false

Boolean

camel.component.debezium-mongodb.topic-naming-strategy

The name of the TopicNamingStrategy class that should be used to determine the topic name for data change, schema change, transaction, heartbeat event etc.

io.debezium.schema.SchemaTopicNamingStrategy

String

camel.component.debezium-mongodb.topic-prefix

Topic prefix that identifies and provides a namespace for the particular database server/cluster is capturing changes. The topic prefix should be unique across all other connectors, since it is used as a prefix for all Kafka topic names that receive events emitted by this connector. Only alphanumeric characters, hyphens, dots and underscores must be accepted.

String

camel.component.debezium-mongodb.transaction-metadata-factory

Class to make transaction context & transaction struct/schemas.

io.debezium.pipeline.txmetadata.DefaultTransactionMetadataFactory

String
Back to top