Splunk HEC

Since Camel 3.3

Only producer is supported

The Splunk HEC component allows sending data to Splunk using the HTTP Event Collector.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-splunk-hec</artifactId>
    <version>${camel-version}</version>
</dependency>

URI format

splunk-hec:[splunkURL]?[options]

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

  • the Component DSL.

  • in a configuration file (application.properties, *.yaml files, etc).

  • directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

  • They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.

  • They allow externalizing the configuration from the code.

  • They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The Splunk HEC component supports 4 options, which are listed below.

Name Description Default Type

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

sslContextParameters (security)

Sets the default SSL configuration to use for all the endpoints. You can also configure it directly at the endpoint level.

SSLContextParameters

useGlobalSslContextParameters (security)

Enable usage of global SSL context parameters.

false

boolean

Endpoint Options

The Splunk HEC endpoint is configured using URI syntax:

splunk-hec:splunkURL

With the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

splunkURL (producer)

Required Splunk Host and Port (example: my_splunk_server:8089).

String

Query Parameters (13 parameters)

Name Description Default Type

bodyOnly (producer)

Send only the message body.

false

boolean

headersOnly (producer)

Send only message headers.

false

boolean

host (producer)

Splunk host field of the event message. This is not the Splunk host to connect to.

String

index (producer)

Splunk index to write to.

camel

String

source (producer)

Splunk source argument.

camel

String

sourceType (producer)

Splunk sourcetype argument.

camel

String

splunkEndpoint (producer)

Splunk endpoint Defaults to /services/collector/event To write RAW data like JSON use /services/collector/raw For a list of all endpoints refer to splunk documentation (HTTP Event Collector REST API endpoints) Example for Spunk 8.2.x: https://docs.splunk.com/Documentation/SplunkCloud/8.2.2203/Data/HECRESTendpoints To extract timestamps in Splunk8.0 /services/collector/eventauto_extract_timestamp=true Remember to utilize RAW\{} for questionmarks or slashes in parameters.

/services/collector/event

String

sslContextParameters (producer)

SSL configuration.

SSLContextParameters

time (producer)

Time this even occurred. By default, the time will be when this event hits the splunk server.

Long

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

https (security)

Contact HEC over https.

true

boolean

skipTlsVerify (security)

Splunk HEC TLS verification.

false

boolean

token (security)

Required Splunk HEC token (this is the token created for HEC and not the user’s token).

String

Message Headers

The Splunk HEC component supports 1 message header(s), which is/are listed below:

Name Description Default Type

CamelSplunkHECIndexTime (producer)

Constant: INDEX_TIME

Epoch-formatted time. Specify with the time query string parameter. Sets a default for all events in the request. The default time can be overridden.

Long

Usage

Message body

The body must be serializable to JSON, so it may be sent to Splunk.

A String or a java.util.Map object can be serialized easily.

Use Cases

The Splunk HEC endpoint may be used to stream data to Splunk for ingestion.

It is meant for high-volume ingestion of machine data.

Configuring the index time

By default, the index time for an event is when the event makes it to the Splunk server.

from("direct:start")
        .to("splunk-hec://localhost:8080?token=token");

If you are ingesting a large enough dataset with a big enough lag, then the time the event hits the server and when that event actually happened could be skewed. If you want to override the index time, you can do so.

from("kafka:logs")
        .setHeader(SplunkHECConstants.INDEX_TIME, simple("${headers[kafka.HEADERS].lastKey('TIME')}"))
        .to("splunk-hec://localhost:8080?token=token");
from("kafka:logs")
        .toD("splunk-hec://localhost:8080?token=token&time=${headers[kafka.HEADERS].lastKey('TIME')}");

Spring Boot Auto-Configuration

When using splunk-hec with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-splunk-hec-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 5 options, which are listed below.

Name Description Default Type

camel.component.splunk-hec.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.splunk-hec.enabled

Whether to enable auto configuration of the splunk-hec component. This is enabled by default.

Boolean

camel.component.splunk-hec.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.splunk-hec.ssl-context-parameters

Sets the default SSL configuration to use for all the endpoints. You can also configure it directly at the endpoint level. The option is a org.apache.camel.support.jsse.SSLContextParameters type.

SSLContextParameters

camel.component.splunk-hec.use-global-ssl-context-parameters

Enable usage of global SSL context parameters.

false

Boolean
Back to top